Lambda 2 loom connector

[Robrob]

I need to replace the loom lambda sensor 2 connector on my my Qashqai 2016 as there’s a dodgy wire to it (or can it be remade?). Where can I source one from? (I’m confident doing it if someone can give me some tips please). Thank you

[Robrob]

[calnorth]

Not sure if such a change has been reported on this site. The connector maybe Nissan proprietary and not available anywhere other than Nissan. And that maybe as complete loom part.

Is it the connector itself damaged or a pin... or wire. The wire could be solder re joined.

[Robrob]

I think the white wire has been pulled. Does the connector dismantle do you think?

[calnorth]

I think the white wire has been pulled. Does the connector dismantle do you think?

Usually they do...each pin has a little lock tab that engages in the connector body when pushed in. It needs something like a small blade screwdriver or thin paper pin to push into the socket to release the connector pin in question. Something like this:

[Robrob]

Thank you very much! That helps!