Bonnet struts
-
- Posts: 26
- Joined: Thu Dec 31, 2020 9:21 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
I have purchased some bonnet struts and they have come with an added component but I can’t find any information as to how to use the added piece I have attached two pictures one of the set and a separate one with the piece I am not sure of any help would be appreciated
Mar 20 1.3 DIG-T 160 Tekna manual in Red
These are nuts for use if you use a different hole for the lower part of the gas struts tha didn't have a bolt in you bend the strip so you can position the nut under the hole and screw the ball joint in then pull the metal strip out i had to do this as the ball joint was a different sise thread to the hole you are supposed to use that you remove the bolt from . hope this makes sense
2014 1.2 tekna magnetic red
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Dave, great that the Struts work they are a nice Addition. With the Russian Kit I had the same problem with the Struts initially but there was a Tip to place them on the Floor and Pump then a few times which worked on the J11A and when re-fitting on the J11B - Dave
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
- lapalmeraie
- Posts: 386
- Joined: Tue Mar 28, 2017 5:11 am
- Location: Belgium
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
- Contact:
Same here, had a hard time (and ruined my hands) to pump them first indoors against the floor.
This is import though because if you don't do this this resistance is being exposed to the bonnet itself and you may fold the bonnet when trying to close it.
So always first pump the struts by hand some times before installing, even if it seems almost impossible.
This is import though because if you don't do this this resistance is being exposed to the bonnet itself and you may fold the bonnet when trying to close it.
So always first pump the struts by hand some times before installing, even if it seems almost impossible.
Qashqai J11b 2020 N-TEC - 1.3 DIG-T 140PS
Qashqai J11a Connect Edition 1.6 DIG-T 163PS
Qashqai J11a Connect Edition 1.6 DIG-T 163PS