Hi everyone.
Fore some weeks ago, I managed to destroy the "Back door finisher". I taped it and could open and lock from the "Finisher".
Now I got a new part, and try to replace the old one with a new one.
But now suddenly it would not open, is it a way to open the backdoor from inside?
Sincerely
Morty
Backdoor finisher
- calnorth
- Posts: 2719
- Joined: Mon Feb 11, 2019 2:01 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
That requires a 12v signal from the Body Control Module (BCM) to drive the opener actuator. You would need to supply that 12v some how or remove/damage the finisher.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
1.6 Dig-T N-Connecta
Hi calnorth, thanks for replay. I have managed to open it now, used contact spray. I have now clear my way th change the finisher, do you know how to attach the finisher it is six screws with rectanguler holders. Do I have to unscrew the holders to slide on the finisher.
- calnorth
- Posts: 2719
- Joined: Mon Feb 11, 2019 2:01 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Morty07 wrote: ↑Wed Mar 10, 2021 1:54 pm Hi calnorth, thanks for replay. I have managed to open it now, used contact spray. I have now clear my way th change the finisher, do you know how to attach the finisher it is six screws with rectanguler holders. Do I have to unscrew the holders to slide on the finisher.
I don't have details of the finisher fixings...sorry.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
1.6 Dig-T N-Connecta
- gloucester
- Posts: 5196
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Welcome to this forum.
I haven't watched these but one may answer your query - it's a common failure on the J10 model
I haven't watched these but one may answer your query - it's a common failure on the J10 model
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)