Hi,
Just had my rear bumper replaced on my 2016 Qashqai but i have noticed I can see one of the middle plastic clips which I couldnt see on my old bumper. The gap seems rather big so I think a seal is missing or the bumper isnt aligned properly (although it seems fine on the sides).
Can anyone take a pic of their rear bumper (J11) with the boot lid open so I can see what the bumper fit and seals should look like please?
Thank you
Photo assistance please
-
- Posts: 5
- Joined: Fri Aug 13, 2021 1:55 pm
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
-
- Posts: 5
- Joined: Fri Aug 13, 2021 1:55 pm
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Thanks mate! much appreciated.
Can you advise if you can see a white clip under the trim by the bolt lock?
I have circled in the pic
-
- Posts: 5
- Joined: Fri Aug 13, 2021 1:55 pm
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
-
- Posts: 5
- Joined: Fri Aug 13, 2021 1:55 pm
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Thats the gap i have.
Its a genuine rear bumper too from nissan.
Is that normal?
Its a genuine rear bumper too from nissan.
Is that normal?