Tekna roof rails

Bodywork & Interior problems
plutare
Posts: 5
Joined: Thu Aug 13, 2015 7:59 am

Post by plutare »

i know that this thing was mentioned in the past, but i can't seem to find any certain answers.So is there a possibility of installing the Tekna roof rails on an acenta premium?these are the rails as a spare part...http://www.car.gr/parts/view/6638311/

DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Hi John, well I for one cannot understand a word of what is written on that Website Have you used the "Search" Button on the Forum as there has been discussions on this subject before as mentioned that might help you. Try these and see if they help you - Dave :

http://www.qashqaiownersclub.co.uk/foru ... c3142.html

http://www.qashqaiownersclub.co.uk/foru ... ad-bearing



11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
User avatar
Hound
Posts: 1163
Joined: Tue May 19, 2015 12:37 am
Location: Deeside
Qashqai Model: Still looking for one....

Post by Hound »

Here's the translation of that website. They don't give a price for the rails, so certainly live up to their name of "I ANNOY" I would think that it is a major task to fit the rails to a non-rail car, including removal of all internal roof headlining. A dealer would most likely charge a fortune for the job. If you want the rails more for appearance than utility, or only expect very light load-bearing, there are cheaper and easier options as Dave has kindly listed.
Used to have 2015 1.6dCi 130 Xtronic N-tec+ in Gun Metallic
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Nicholas, thanks for the Translation and did you notice it states "Used". As you have mentioned this mod is a bit on the Major Side and costly - Dave
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
plutare
Posts: 5
Joined: Thu Aug 13, 2015 7:59 am

Post by plutare »

guys this is a used spare part from a tekna model.what i am asking is if the acenta model has the bolts ready for this rail, and if i buy it, i just have to screw it on the base, or if there is nothing under the black plastic on my roof . If that is the case, i wouldn't like to make new screw holes on my roof, no way.But it seem weird to me for nissan, to produce two different types of roofs for these models...I hope i was clear enough
Qash
Posts: 198
Joined: Mon Aug 04, 2014 2:10 pm

Post by Qash »

Picture 1 shows the Tekna model, while the picture 2 shows the solution to all the other variants. Cost the same and sold by Nissan.
QQ BUSINESS+ (Tekna 17")1,5 dci
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Hi Senad, I thought I had seen those pics before ! Open up the second Forum Topic Data above and you will see the facts- Dave
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
plutare
Posts: 5
Joined: Thu Aug 13, 2015 7:59 am

Post by plutare »

Maybe its my poor English, but i think that you haven't understood what i want.i want to install the roof rails that are pre-installed in the tekna models, (not the extra roof rack), on a non tekna model. Can this be possible?The link that i posted, shows the spare part of the roof rails that i want to install.And my question is if there holes all ready on my cars roof in order to just screw the roof rail spare part, or if i have to make new holes (which is something that i don't want to do)
User avatar
Gel
Posts: 3265
Joined: Thu May 22, 2014 12:02 pm
Location: Thames Valley UK
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Gel »

Try: http://www.aliexpress.com/item/High-qua ... 24996.html http://www.aliexpress.com/item/Car-styl ... 38927.html Surely a local dealer could advise if the holes you need are on other models, but unused.
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol :D
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

John, I think that members are trying to help you but you really need a member that has done this modification and IMHO I would think not so many if any have or would attempt this ! I would suggest asking your Dealer - Dave This is what was mentioned before : "If you have a QQ without the Roof Rails installed as it appears IMHO I would think that this is a Major Task to take on to install these Rails as an after thought. It is highly possible that Nissan have Tooled Up the manufacture and that the Fixing Holes are already pre-drilled but then you have to drop the Roof lining to install them etc...." If you have not watched this already here is a J10 Installation for your interest :

https://www.youtube.com/watch?v=nIe3rTg ... e=youtu.be

11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
Post Reply