Tapping noise in rear on straight roads
Try, but I think the whole chassis is weak for torsion movement or bumpy roads. Then it starts to generate this tapping noises. It also can be that welding robot didn’t make strong enough welding points... who knows...
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
The same with me. It started to do it after off-road drive on bad terrain. It is however very seldom.
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
Hello
I am a owner of a 2015 Qashqai and I have the same noise as you.
It is a metallic noise (like a clack) that comes from the back, in my opinion.
The dealer spread the sheets at the top of the trunk under the joint. The noise had disappeared and it reappeared. The dealer again spread the sheets along the entire length but the noise is still there.
Would anyone have found the solution for this problem?
Sincerely
I am a owner of a 2015 Qashqai and I have the same noise as you.
It is a metallic noise (like a clack) that comes from the back, in my opinion.
The dealer spread the sheets at the top of the trunk under the joint. The noise had disappeared and it reappeared. The dealer again spread the sheets along the entire length but the noise is still there.
Would anyone have found the solution for this problem?
Sincerely
Hallo dan59,
I am new to this forum.
I came here because i have exactly the same problem with my wife s 2017 Quashqai 1.2 with Panorama roof.
The car has now 21000 km. The tapping noiese started at around 15000 km.
My dealer made exactly the same procedure with the car as your dealer did. But it didn t help.
Maybe the first 300 m after starting the car there is no noise but after some km it starts again.
I bought the stuff mentioned by nomader and duncho and applied it the same way like shown on page 5 of this thread.
https://www.amazon.co.uk/Wurth-Bond-Sea ... B00K19ELQO
It didn t stop the tapping.
Nileve
I am new to this forum.
I came here because i have exactly the same problem with my wife s 2017 Quashqai 1.2 with Panorama roof.
The car has now 21000 km. The tapping noiese started at around 15000 km.
My dealer made exactly the same procedure with the car as your dealer did. But it didn t help.
Maybe the first 300 m after starting the car there is no noise but after some km it starts again.
I bought the stuff mentioned by nomader and duncho and applied it the same way like shown on page 5 of this thread.
https://www.amazon.co.uk/Wurth-Bond-Sea ... B00K19ELQO
It didn t stop the tapping.
Nileve
The problem is weak welding points of the chassis. More you drive off road or on bumpy roads, higher probability that some the points start to make ticking noise. The noise in my or nomander’s case isn’t coming from the treated area. I can clearly hear it’s coming from right hand side which I didn’t touch before.
It is poor body build job, I have never had a car making noise on chassis itself, more less some squeezing plastics. Complain to Nissan....
It is poor body build job, I have never had a car making noise on chassis itself, more less some squeezing plastics. Complain to Nissan....
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
There is no possibility to fix the reason, but the problem. So you can only remedy poor quality job by applying the fix mentioned in this thread.
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!