Front Bumper Removal J11

Bodywork & Interior problems
Post Reply
David24
Posts: 1
Joined: Fri Sep 08, 2017 2:35 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Front Bumper Removal J11

Post by David24 » Fri Sep 08, 2017 2:38 pm

Hi there,
About one year ago I have bought an Nissan Qashqai J11, due to an accident I want to remove my front bumper,
Does anyone have an removal and installation guide ?

Thanks


User avatar
Hound
Posts: 1091
Joined: Tue May 19, 2015 12:37 am
Location: Hope Mountain, North Wales

Re: Front Bumper Removal J11

Post by Hound » Fri Sep 08, 2017 4:06 pm

bumper.jpg

Image
2015 1.6dCi 130 Xtronic N-tec+ in Gun Metallic


Craig_Broadbent
Posts: 19
Joined: Tue Nov 08, 2016 2:02 pm

Re: Front Bumper Removal J11

Post by Craig_Broadbent » Sat Sep 09, 2017 7:53 pm

These instructions assume some knowledge.
3 fillet moulding is the one around the front wheel arch. There is a screw underneath at the front. Then push at the clipping point from inside. If you can squeeze the clips together it will be easier.
Harness clips are a real nightmare to release. Need a screwdriver to release the clip. Good luck


User avatar
Hound
Posts: 1091
Joined: Tue May 19, 2015 12:37 am
Location: Hope Mountain, North Wales

Re: Front Bumper Removal J11

Post by Hound » Wed Sep 13, 2017 11:46 am

Following on from Craig's point - hopefully this pic gives a heads-up to where pawls and clips are located on the wheel arch fillet.

fillets.jpg

Image
2015 1.6dCi 130 Xtronic N-tec+ in Gun Metallic


Post Reply

Return to “Bodywork & Interior”

Who is online

Users browsing this forum: No registered users and 1 guest