Hi there,
About one year ago I have bought an Nissan Qashqai J11, due to an accident I want to remove my front bumper,
Does anyone have an removal and installation guide ?
Thanks
Front Bumper Removal J11
-
- Posts: 20
- Joined: Tue Nov 08, 2016 2:02 pm
These instructions assume some knowledge.
3 fillet moulding is the one around the front wheel arch. There is a screw underneath at the front. Then push at the clipping point from inside. If you can squeeze the clips together it will be easier.
Harness clips are a real nightmare to release. Need a screwdriver to release the clip. Good luck
3 fillet moulding is the one around the front wheel arch. There is a screw underneath at the front. Then push at the clipping point from inside. If you can squeeze the clips together it will be easier.
Harness clips are a real nightmare to release. Need a screwdriver to release the clip. Good luck
- Hound
- Posts: 1163
- Joined: Tue May 19, 2015 12:37 am
- Location: Deeside
- Qashqai Model: Still looking for one....
Following on from Craig's point - hopefully this pic gives a heads-up to where pawls and clips are located on the wheel arch fillet.
Used to have 2015 1.6dCi 130 Xtronic N-tec+ in Gun Metallic