Have had my 2010 Qashqai +2 for a few years now it has been a reliable car and nice to drive.
However, a few weeks ago I heard a loud noise from the boot. One of the catches on the rolling parcel shelf had sheared off. (Attached an image below)
I have been trying to source replacement catches on ebay without much success (as it looks like there is a screw to remove the catch).
If I can't replace the catches then I assume I will have to source a used roller (around £150 on ebay).
Has this happened to anyone before? Any tips?
Damaged rolling parcel shelf
-
- Posts: 2
- Joined: Thu Oct 04, 2018 10:09 am
- Location: Norway
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
- Gel
- Posts: 3265
- Joined: Thu May 22, 2014 12:02 pm
- Location: Thames Valley UK
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Try an online car breakers for whole unit or fabricate something suitable in metal.
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
These two places might be worth a try - Dave
This place seems to be cheaper than eBay : https://www.partsgateway.co.uk/nissan-p ... rcel-shelf
Vospers seem to stock individual parts :
http://www.vospers.com/parts/genuine-ni ... -clip.html
This place seems to be cheaper than eBay : https://www.partsgateway.co.uk/nissan-p ... rcel-shelf
Vospers seem to stock individual parts :
http://www.vospers.com/parts/genuine-ni ... -clip.html
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
-
- Posts: 135
- Joined: Sat Nov 05, 2016 1:01 pm
Have it 3 D printed?
2016 1.6 xtronic tekna diesel 130 bhp
1998 4.6 v8 Range Rover petrol auto 225 bhp
2019 Skoda Citigo 1.0 sel green tech 5 dr 75 bhp
2009 Vauxhall Astra Twintop 1.8 petrol sport 2 door 138bhp
1998 4.6 v8 Range Rover petrol auto 225 bhp
2019 Skoda Citigo 1.0 sel green tech 5 dr 75 bhp
2009 Vauxhall Astra Twintop 1.8 petrol sport 2 door 138bhp
-
- Posts: 2
- Joined: Thu Oct 04, 2018 10:09 am
- Location: Norway
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
Cheers for the tips!
The simplest solution looks like to get a used roller like the ones like DaveBerlin suggested on the Parts Gateway. The only problem is, with shipping and import tax to Norway it gets a bit more expensive. Not ruling it out though. A locally sourced roller is around NOK 1500 (£140) plus delivery. The ones from Parts Gateway might end up being a bit cheaper. It is just a bit daft as my roller works great, its the retainer clip that is broken.
The clips from Vospers seem to fit another type of parcel shelf.
However, 3D printing might be a really good shout!
I will take the mechanism apart and see what can be done... will report back after a bit more investigation.
Cheers,
The simplest solution looks like to get a used roller like the ones like DaveBerlin suggested on the Parts Gateway. The only problem is, with shipping and import tax to Norway it gets a bit more expensive. Not ruling it out though. A locally sourced roller is around NOK 1500 (£140) plus delivery. The ones from Parts Gateway might end up being a bit cheaper. It is just a bit daft as my roller works great, its the retainer clip that is broken.
The clips from Vospers seem to fit another type of parcel shelf.
However, 3D printing might be a really good shout!
I will take the mechanism apart and see what can be done... will report back after a bit more investigation.
Cheers,
- gloucester
- Posts: 5194
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Have you actually been to a dealer and asked them for a clip? That's the simplest solution...
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)