Nissan QashQai Forums

Any guides/pictures of how to ? Heated seat switches, if that makes a difference.

Used search = no results

Found these at eBay - two clips at the back and a retaining loop at the front?
The screws are to secure the switches in

Two clips at the front too:

I can get the back unclipped, just wasn't sure if it was screwed at the front or not.

Wonder if i can get it out without removing any other bits ?

Noddy1875 wrote: ↑Sun Jan 13, 2019 9:51 pm Wonder if i can get it out without removing any other bits ?

The answer is no

I put a carbon-fiber cover on mine

Ozzy, the Cup Holder Surface Finish looks a nice addition, although it seems to damage easily. Did you buy the part like this, add the Folie yourself or was it done with Foiling with the Hydrographics Process - Dave

viewtopic.php?f=21&t=4806&p=43928&hilit=Foiling#p43928

This is from the Nissan Rogue manual
Says there are 6 clips

Hi!

I just registered, but have enjoyed this forum for a while since I got my Qashqai.

I have a rattle from the left side of the transmission tunnel that drives me mad. It rattles against the cup holder, on the inside. I need to remove the cup holder to inspect what is wrong.

I can remove the back of the cup holder, but the front sits under (I think) the "gear frame" and perhaps the 2 side panels next to the gear frame. I tried to use some force hoping it could come off and slide under in some way, without any luck.

The image in the post above shows an automatic version and it seems as if you could just lift the cup holder. I have a manual gear box and that doesn't work.

Has anyone managed to remove the cup holder from a 2018 manual and could explain how?

Thanks!
//Olof, a Swede living in Spain

https://cardiagn.com/instrument-panel-qashqai-j11/

Page 17