Page 1 of 1

Handbrake button broke

Posted: Tue Oct 01, 2019 6:22 pm
by Grimlock
Newbie, and more than a little disappointed that 3 weeks since purchase, the handbrake button just split into bits tonight.

Nothing broke per say, just came apart.
Is this common and how do I resolve it?
Just glue the button back together?

Thanks in advance

Car is a 17 J11.

Re: Handbrake button broke

Posted: Tue Oct 01, 2019 8:04 pm
by Noddy1875
Still under warranty, take it back.

Re: Handbrake button broke

Posted: Wed Oct 02, 2019 6:58 am
by DaveBerlin
Gridlock, as mentioned by Noddy if you still have a Guarantee then get down to a Nissan Dealer, they have your money and need to put defects right. You should not need to worry about repairing it yourself, but nice to know why it has happened - Best of Luck Dave 😉

Re: Handbrake button broke

Posted: Sun Jan 02, 2022 4:19 pm
by Frank1
Another newbie here!! I have 2016 tekna so out of warranty. Parking button top has come loose ie the chrome surround and black cover but is hinging forwards from front. Can I carefully just glue this down again with something like tec7? 👍

Re: Handbrake button broke

Posted: Sun Jan 02, 2022 6:43 pm
by andy2019
Parking button easy to replace. But expensive to buy new so have a look on ebay or local scrapyard

Re: Handbrake button broke

Posted: Sun Jan 02, 2022 7:27 pm
by gloucester
Welcome - certainly try glue

Re: Handbrake button broke

Posted: Tue Jan 04, 2022 4:32 pm
by Qashowner
Are you using the button to apply the parking brake and release it? It is not necessary to touch it normally, parking brake comes on when the engine is turned off and should release when you pull away. In traffic just use the foot brake and on hills use the hill start assist. I do drive an auto and assume the system would be the same for a manual gearbox.