Rear passenger doorhandle quandary

Bodywork & Interior problems
User avatar
gloucester
Posts: 5173
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by gloucester »

Great - keep it away from the kids!
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)

User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

AlecF wrote: Sun Dec 15, 2019 3:11 pm Problem solved. Gosh, doesn’t it feel good to write those words?

The answer was to cut a 1” x 12” strip of 25 thou rigid, flexible transparent PVC, as used for covering garden frames etc. It slipped in nicely, exactly level with the top of the arm rest. It worked on the third attempt with a reassuring click.

More surprisingly, not only does the door lock and unlock on central locking, and opens from inside, but the outside handle also works - though it doesn’t feel right and its use will be discouraged for now.

So thanks to all for your advice, and this tip can be archived for anyone whose door is childlocked and refuses to open!

Regards,
Alec.
Well above my pay grade Alec...but brilliant

Colin
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
AlecF
Posts: 7
Joined: Fri Dec 13, 2019 11:28 am
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by AlecF »

Just one small final query, as I am about to order a used replacement rear outer passenger door handle (saves having to spray it!), can anyone tell me whether Series 1 (up to 2013) rear handles are identical to later models?
Many thanks, Alec.
User avatar
gloucester
Posts: 5173
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by gloucester »

Well they're a different shape...
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
AlecF
Posts: 7
Joined: Fri Dec 13, 2019 11:28 am
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by AlecF »

Thanks - I haven’t had the chance to compare them. I will make sure I get the correct shape.
Regards, Alec.
User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

calnorth wrote: Fri Dec 13, 2019 3:20 pm I think there are two ways to open the door(s). From the service documents QQ J10

First is by using the Nissan CONSULT diagnosis tool to command the door lock/latch system to release. Goto Nissan really.

The other method could mean sacrifice of the door trim..called Finisher Panel. The panel is clipped on around its edges and needs prising off. That includes around the inner handle. Then a 12v supply is needed to operate the lock mechanism.

The other method I mention here looks to be dead awkward and may cost the trim panel plus handle problem. Interior info for doors etc attached.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
Post Reply