Page 1 of 1

J11 Washer Pump

Posted: Thu Jan 30, 2020 10:26 am
by Timelord
Hi,
I'm having problems with the front screen washer. The waster only dribbles out. I have split the line where the joint is and blown through and it seems fine. Water does come out of the tube, but not under much pressure. The rear washer works fine. My quewstions are:
How do you get to the pump?
Does the pump do both front and rear or do they have separate pumps?
Thanks,
Jeremy.

Re: J11 Washer Pump

Posted: Thu Jan 30, 2020 11:24 am
by calnorth
Timelord wrote: Thu Jan 30, 2020 10:26 am Hi,
I'm having problems with the front screen washer. The waster only dribbles out. I have split the line where the joint is and blown through and it seems fine. Water does come out of the tube, but not under much pressure. The rear washer works fine. My quewstions are:
How do you get to the pump?
Does the pump do both front and rear or do they have separate pumps?
Thanks,
Jeremy.
Attached is the J11 diagram I have. Page WW-10. Appears to be a simple switch and pump.

Re: J11 Washer Pump

Posted: Thu Jan 30, 2020 12:31 pm
by Gel
Honest John always recommend cleaning reservoir with this;
obtainable from Boots etc. ;)

milton.JPG


Re: J11 Washer Pump

Posted: Thu Jan 30, 2020 12:35 pm
by Gove
Just had a new pump fitted for the same reason on my 2014 j11.

Re: J11 Washer Pump

Posted: Thu Jan 30, 2020 4:35 pm
by Timelord
Thanks for the info. It appears the motor is reversed to wash the back window. Not sure how to 'Remove front fender protector. Refer to EXT-32, "Removal and Installation"'
to get the motor out. Any info would be useful.

Re: J11 Washer Pump

Posted: Thu Jan 30, 2020 5:55 pm
by Gove
Had mine replaced under warranty so no idea how to get to it.

Re: J11 Washer Pump

Posted: Fri Jan 31, 2020 8:16 am
by calnorth
Timelord wrote: Thu Jan 30, 2020 4:35 pm Thanks for the info. It appears the motor is reversed to wash the back window. Not sure how to 'Remove front fender protector. Refer to EXT-32, "Removal and Installation"'
to get the motor out. Any info would be useful.
Exterior Doc attached: