My wife managed to scrape the lower rear door external moulding on her Qashqai, so I am looking at replacing it. Does anyone know how it is attached? Looking at photos of the partno 828704EA0A on the Internet it looks as if it is just clipped on......
Thanks
Replacing door moulding on 2019 J11 Facelift
-
DaveBerlin
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Welcome to the Forum. Normally as you have mentioned these parts are “Popped Off” but are most likely a pretty tight fit to get them to move. Be careful not to distort the Door Panel - Dave 
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
-
rochesb
- Posts: 3
- Joined: Fri Jan 31, 2020 9:05 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Thanks. I might ask the dealer to replace it as most door skins these days seem very thin & prone to distortion & minor dings. The top edge of the moulding in particular seems to be held in place very firmly, almost as if there is an adhesive bond or double sided tape holding it in place as well as the clips in the photo above.
