Good evening,
I’m new to this, so apologies in advance.
I have a 2010 Qashqai - 1.5 Acenta. I recently did a repair on the wiper motor, having to remove the wiper arms/plastic trim.
Whilst putting the wiper arm back on (or attempting to), I dropped the nut into the oblivion (engine bay) and couldn’t find it.
Can someone advice on size/ thread?
Thank you in advance.
Dave
Wiper Arm Nut
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Welcome to the Forum ! Why do you not try a rough measurement or even a correct one with a measuring instrument such as a Vernier Gauge, just to give you a rough or in fact accurate size if possible. I personally would go to a Hardware Shop and get a Range of Nuts eg M8 / M10 / etc as they must only be penny items and the problem should be solved. Or you could ask your friendly Nissan Dealer - Dave
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
The nut you droppd may be resting on the bottom of the engine tray. So if you have car ramps you can remove it to have a look. Or you can measure the size of the nut you'll still have on the other front wiper blade armdptelford wrote: ↑Thu Apr 16, 2020 9:14 pm Good evening,
I’m new to this, so apologies in advance.
I have a 2010 Qashqai - 1.5 Acenta. I recently did a repair on the wiper motor, having to remove the wiper arms/plastic trim.
Whilst putting the wiper arm back on (or attempting to), I dropped the nut into the oblivion (engine bay) and couldn’t find it.
Can someone advice on size/ thread?
Thank you in advance.
Dave