My first post - Many error codes. Not sure where to go next
Posted: Sun Dec 20, 2020 5:57 pm
Well I love this car, it runs well and drives very well.. but when I leave the car standing for a while (4,5,6 hours), then start I get the non-autostart issue.. flashing yellow for traction and ABS. If I stop the car, lock it, unlock and start again, the issue goes away, however the stop/start still doesn't work.
Reported codes(there are a few):
U100001 - communication CAN circuit
C170400 - Left front low air pressure
U0121 - Multiplexed traction control connection
P0470 - Turbine upstream pressure senser
P1525 - Consistent multiplex signals for cc/SYL
P0135 - Proportional richness sensor heating circuit
P1503 - Air vent control
I've changed the battery, I've also cleaned the turbine sensor pipe, and currently running DPF additive.
I'd love to get this car in good order, as I plan to keep is long term when back in the country.
On another note, has anyone noticed a difference when riding with 17" or 19" wheels.. it's curently a very cushioned ride with 17" wheels, and thinking or upgrading providing the comfort isn't jeopadized.
Reported codes(there are a few):
U100001 - communication CAN circuit
C170400 - Left front low air pressure
U0121 - Multiplexed traction control connection
P0470 - Turbine upstream pressure senser
P1525 - Consistent multiplex signals for cc/SYL
P0135 - Proportional richness sensor heating circuit
P1503 - Air vent control
I've changed the battery, I've also cleaned the turbine sensor pipe, and currently running DPF additive.
I'd love to get this car in good order, as I plan to keep is long term when back in the country.
On another note, has anyone noticed a difference when riding with 17" or 19" wheels.. it's curently a very cushioned ride with 17" wheels, and thinking or upgrading providing the comfort isn't jeopadized.