1,6DIG-T accelerator pedal

Forum for Engine, Exhaust, Drivetrain, ECU
Post Reply
freshman
Posts: 2
Joined: Sat Dec 26, 2020 7:46 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

1,6DIG-T accelerator pedal

Post by freshman » Sat Dec 26, 2020 8:14 pm

Hello,

Does anyone have a plan for the electrical wiring of the accelerator pedal for QASHQAI 1,6 DIG-T.
I have it for J10, but I can't find it for J11.
I can also ask otherwise.
Is the accelerator pedal at 1.6 DIG-T (MR16DDT 2018) connected in the same way as at 2.0 16V (MR20DE 2011)
I have BLITZ THROTTLE CONTROLLER for MR20DE and I wonder if I can use it on my MR16DDT? :roll:
2011 QASHQAI 2,0/16V
2018 QASHQAI 1,6 DIG-T

User avatar
calnorth
Posts: 1852
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: 1,6DIG-T accelerator pedal

Post by calnorth » Sun Dec 27, 2020 8:59 am

Don't think anybody can accurately answer your questions. Detailed ECU info is'nt available but what I have seen is two sensor (potentiometer) inputs of 3 wires each.
Mk2 Qashqai Facelift - J11b (2017–present)
1.6 Dig-T N-Connecta

freshman
Posts: 2
Joined: Sat Dec 26, 2020 7:46 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–present)

Re: 1,6DIG-T accelerator pedal

Post by freshman » Sun Dec 27, 2020 1:54 pm

calnorth thanks for the reply.
It's true. In the J10, there are two potentiometers with three wires each.
The BLITZ THROTTLE CONTROLLER is connected as an interface between the pedal and the ECU.
Image
The figure shows the connection diagram for the MR20DE.
Now I’m just wondering if the J11 with the MR16DDT engine has the same wire placement on the pedal connector.
2011 QASHQAI 2,0/16V
2018 QASHQAI 1,6 DIG-T

Post Reply