J11 1.5dci boost sensor/iat sensor removal??

Forum for Engine, Exhaust, Drivetrain, ECU
Post Reply
blueyonder
Posts: 5
Joined: Wed Feb 07, 2018 3:28 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by blueyonder »

Hi all, first post here- hope somebody can help me with what's probably a simple issue...
MIL light shows P0095, inlet air temperature fault. I've found the sensor with a view to remove and testing it, removed the rubber inlet hose, but it's buried beneath what looks like an aluminium throttle housing or similar, which prevents the single securing bolt being fully unscrewed. Can somebody let me know what this it, and can it just be loosened to allow access to the sensor? It's secured with 2 off approx 11mm bolts, if that helps.

User avatar
MikeGC
Posts: 1850
Joined: Tue Feb 07, 2017 11:50 am
Location: Stockport
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by MikeGC »

I’m sorry I can’t help but welcome to the forum
March '22 - J12 1.3DIG-T 160 CVT Tekna+ with all wheel drive - Pearl Black
July '19 - J11B 1.3DIG-T 160 DCT Tekna - Vivid Blue
March '17 - Qashqai J11A 1.5dci n-connecta - gunmetal
September '14 - Juke 1.5dci gunmetal ascenta premium (red accent packs)
Post Reply