Qashqai +2 1.6dci R9M (MIL error code P253F Engine Oil deteriorated)

Forum for Engine, Exhaust, Drivetrain, ECU
Post Reply
Travino
Posts: 1
Joined: Sun Sep 23, 2018 5:14 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Travino »

Hi - I've had DPF issues on my Qashqai and have had a forced regen and changed oil/filter but I'm still getting the P253 code (engine oil deteriorated).
It appears the oil service needs resetting but I can't find an answer to how this is done on the net or any forums.

Does anyone if there is an option to reset the oil service? or is there a sensor that could be potentially still sensing contaminated oil?

I've had this done at non-franchised garage and they are scratching their heads

Any help greatly received

Trav

User avatar
gloucester
Posts: 5173
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by gloucester »

Is this what you mean?:

https://www.milneroffroad.com/blog/how- ... indicator/

Also check out the handbook - page 2-20 for the J10 (page 2-18 has it for the J11):


[Maintenance]
The maintenance intervals of the following reminders
can be set or reset:
• [Service] for engine oil change service reminder
Select this submenu to view, or reset the distance
driven information or to set an interval
(petrol models).
– View the distance driven information:
Select [Service].
– Set procedure (petrol models onlyjA ):
1) Select [Service].
2) Select the distance driven/interval information.
3) Turn the switch and set the interval (mileage)
accordingly. For interval (mileage) details,
see the separately provided Warranty
Information and Maintenance booklet.
4) Short press the switch to confirm the set
interval (mileage).
– Reset procedure after changing engine oil.
CAUTION
Do not perform the reset operation unless
the engine oil has been changed.
For Petrol modelsjA :
1) Select [Service].
2) Select [Reset].
3) Select [Confirm] to confirm the reset of the
distance driven information to zero.
For Diesel modelsjB :
1) Select [Service].
2) Press the switch for more than 2 seconds,
then release.
3) Select [Reset].
4) Select [Confirm] to confirm the reset procedure.
Alternatively while the oil service message is
displayed (where fitted):
After changing the engine oil: Turn the ignition
switch to ON and, while the oil service
message is displayed within 3 seconds, push
both the and switches at the same
time for more than 5 seconds.
The display goes blank for 1 second; the default
interval is then displayed; and finally the
display returns to normal.

(If you haven't got a handbook I just downloaded a J10 one from http://nissanservice.co.il/img/uploads/ ... J10E1E.pdf)
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
Post Reply