Torque settings

Forum for Engine, Exhaust, Drivetrain, ECU
Post Reply
Apollo17
Posts: 3
Joined: Sun Oct 21, 2018 1:48 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Torque settings

Post by Apollo17 » Sun Oct 21, 2018 2:49 pm

Hi all.
I intend to replace the cambelt on my 1.5Dci 2013 360 and wanted to know if there is anywhere on the forum that give the torque settings for,crankshaft pulley etc. and does the blanking plug in the crankshaft sprocket locking hole in the block have a male head,and requires a female tork socket to remove it.
Sorry if this has already been asked somewhere on the forum already.
I appreciate any help,
Daryl


User avatar
gloucester
Posts: 683
Joined: Sun Apr 03, 2016 7:04 am

Re: Torque settings

Post by gloucester » Sun Oct 21, 2018 4:52 pm

Not seen such info - the discussion isn't usually so technical - I'd invest in one of these:

Image
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07


Apollo17
Posts: 3
Joined: Sun Oct 21, 2018 1:48 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Re: Torque settings

Post by Apollo17 » Sun Oct 21, 2018 10:20 pm

Thank you,
I shall look in to getting on.
regards
Daryl


Post Reply

Return to “Engine & Drivetrain”