Multiple OBDII CODES

Forum for Engine, Exhaust, Drivetrain, ECU
Post Reply
Gazriv
Posts: 3
Joined: Thu Nov 01, 2018 7:12 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by Gazriv »

Evening guys, I own a 2009 qMk.1 Qashqai - J10 (2006–2013) ashqai and have been problems with it for a couple of months now. My wife uses the car for short journeys during the week and the occasional long motorway journey twice a month. Recently the car has been going into limp mode with the EML showing on the dash. Sometimes resets itself when the car is turned off/on again but more recently it’s been happening every time she drives it. I purchased an Diagnostic reader and found the following codes:
P0101 (mass or volume air flow A circuit range/performance)
P0110 (intake air temp sensor 1 circuit)
P0381 (glow plug/ heater indicator circuit)
P0089 (Fuel Pressure regulator 1 performance)
!!!
As you can see it’s quite a mind boggling problem for a couple who don’t have much knowledge of cars!
So any help would be appreciated massively, before we decide to take it into a garage!
Many thanks
Last edited by Gazriv on Fri Nov 02, 2018 12:41 pm, edited 1 time in total.
Mk.1 Qashqai - J10 (2006–2013)
1.5l Diesel

User avatar
Gel
Posts: 3265
Joined: Thu May 22, 2014 12:02 pm
Location: Thames Valley UK
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Gel »

You need to add in your forum signature exactly what model you drive;
there are multiple variants & engine types.
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol :D
Gazriv
Posts: 3
Joined: Thu Nov 01, 2018 7:12 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by Gazriv »

Model updated
Mk.1 Qashqai - J10 (2006–2013)
1.5l Diesel
Post Reply