Engine management light

Forum for Engine, Exhaust, Drivetrain, ECU
Post Reply
kadair
Posts: 2
Joined: Tue Nov 27, 2018 10:56 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by kadair »

Hi,

Yesterday the engine management light (amber) came on. Diagnostics were run but found no faults. Today the stop/start failure warning appeared and remains flashing on the dash.

Any help greatly appreciated on why these have appeared. Car is a 2013 360

Thanks

User avatar
Gel
Posts: 3265
Joined: Thu May 22, 2014 12:02 pm
Location: Thames Valley UK
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Gel »

Before starting new thread always use SEARCH box in top left corner; lots of previous posts on STOP/START.
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol :D
kadair
Posts: 2
Joined: Tue Nov 27, 2018 10:56 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by kadair »

Hi,

I did read through the stop/start comments. My main concern is that the EML light has come on with no faults showing on the diagnostic, I can't seem to find a previous post with this issue, thanks.
Deleted User 3871

Post by Deleted User 3871 »

Hi,

A lot of faults are caused by a bad battery or poor earth. Always a good start to check these. Try a search for "battery" and/or "earth" for more info.
kadair wrote: Tue Nov 27, 2018 11:29 am Hi,

I did read through the stop/start comments. My main concern is that the EML light has come on with no faults showing on the diagnostic, I can't seem to find a previous post with this issue, thanks.
Post Reply