hi all,
looking on ebay for a screen camera i can match all the part numbers but not the long one - mine starts 18.........jo
most start with a 19........... is this just an individual serial number or is it relevent to fitment.
all help apreciated, thanks in advance
SCREEN CAMERA ID NUMBER
-
- Posts: 11
- Joined: Sat Dec 30, 2023 6:23 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Have you tried speaking to a Nissan Dealer Parts Dept? Usually helpful in my experience.
The part number beginning 18 and the next with 19 may be a super-cession which could mean if you tried to order a camera (really deep pockets needed) there may be no alternative but the part number beginning 19. Sometimes the Internet seller can be of help, good luck.
The part number beginning 18 and the next with 19 may be a super-cession which could mean if you tried to order a camera (really deep pockets needed) there may be no alternative but the part number beginning 19. Sometimes the Internet seller can be of help, good luck.
-
- Posts: 11
- Joined: Mon Jan 15, 2024 7:21 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
i have just noted the long number on around 25 units on sale on ebay and find none seem to be common. i can find matches for the other numbers in various combinations.
i am leaning towards the long number simply being a serial number
284G3-HV01B
*** this one 18290101680J ***
338981....169
TRW 2037505
i am leaning towards the long number simply being a serial number
284G3-HV01B
*** this one 18290101680J ***
338981....169
TRW 2037505
-
- Posts: 11
- Joined: Mon Jan 15, 2024 7:21 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
fitted this evening - i think its working.
the fault messages on dash are gone, the collision indicator light was flashing sometimes during test drive but cleared for last few miles - learning ?
fault codes for internal fault and intelligent cruise control now cleared (wouldnt previously.
another code has popped up lane camera u1000:01 u1000 googles as 2 or more modules lost comms.
now im thinking that the now working camera has spotted that the LF tyre sensor is not giving a signal and flagging a fault.
i will replace the FL sensor once i c an arrrange coding and go from there .
any other helpfull info accepted
i dont get these issues with my mk1 escort van lol
the fault messages on dash are gone, the collision indicator light was flashing sometimes during test drive but cleared for last few miles - learning ?
fault codes for internal fault and intelligent cruise control now cleared (wouldnt previously.
another code has popped up lane camera u1000:01 u1000 googles as 2 or more modules lost comms.
now im thinking that the now working camera has spotted that the LF tyre sensor is not giving a signal and flagging a fault.
i will replace the FL sensor once i c an arrrange coding and go from there .
any other helpfull info accepted
i dont get these issues with my mk1 escort van lol
-
- Posts: 11
- Joined: Mon Jan 15, 2024 7:21 pm
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
UPDATE, replaced tyre sensor ( pre programmed from ebay ) needed a decent run to register but worked . the comms fault is still there when read via obd but no lights on dash so not that bothered.