Front Bumper Removal J11

Bodywork & Interior problems
Post Reply
David24
Posts: 1
Joined: Fri Sep 08, 2017 2:35 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by David24 »

Hi there,
About one year ago I have bought an Nissan Qashqai J11, due to an accident I want to remove my front bumper,
Does anyone have an removal and installation guide ?

Thanks

User avatar
Hound
Posts: 1163
Joined: Tue May 19, 2015 12:37 am
Location: Deeside
Qashqai Model: Still looking for one....

Post by Hound »

bumper.jpg

Used to have 2015 1.6dCi 130 Xtronic N-tec+ in Gun Metallic
Craig_Broadbent
Posts: 20
Joined: Tue Nov 08, 2016 2:02 pm

Post by Craig_Broadbent »

These instructions assume some knowledge.
3 fillet moulding is the one around the front wheel arch. There is a screw underneath at the front. Then push at the clipping point from inside. If you can squeeze the clips together it will be easier.
Harness clips are a real nightmare to release. Need a screwdriver to release the clip. Good luck
User avatar
Hound
Posts: 1163
Joined: Tue May 19, 2015 12:37 am
Location: Deeside
Qashqai Model: Still looking for one....

Post by Hound »

Following on from Craig's point - hopefully this pic gives a heads-up to where pawls and clips are located on the wheel arch fillet.

fillets.jpg

Used to have 2015 1.6dCi 130 Xtronic N-tec+ in Gun Metallic
Post Reply