Hi All,
I am looking for a spare LED panel for the left tail light, Valeo B003338_B REV12 L please see attached picture.
Any idea where can I get one of these panel?
Thanks for the help.
LED tail light panel
- Hound
- Posts: 1163
- Joined: Tue May 19, 2015 12:37 am
- Location: Deeside
- Qashqai Model: Still looking for one....
Is there too much corrosion damage to clean up the board and replace the SMDs?
Self adhesive copper strip could replace broken track sections.
Self adhesive copper strip could replace broken track sections.
Used to have 2015 1.6dCi 130 Xtronic N-tec+ in Gun Metallic
- Hound
- Posts: 1163
- Joined: Tue May 19, 2015 12:37 am
- Location: Deeside
- Qashqai Model: Still looking for one....
It's a shot in the dark but maybe Valeo could help with a circuit board. These are the proper part numbers for their lamp assemblies.
Yours will be the third one down I believe. Numbers are shown for left and right lights.
Yours will be the third one down I believe. Numbers are shown for left and right lights.
Used to have 2015 1.6dCi 130 Xtronic N-tec+ in Gun Metallic
I would clean it up & rewire it with some standard wire glued down to make tracks. Would be a nice project. May be even possible to put in another type of bulb by drilling out the surface mounted bulbs if there is room behind. the choice and options are endless.
- gloucester
- Posts: 5197
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Welcome to this forum.
Lots on eBay but you'd have to make sure they were working
Lots on eBay but you'd have to make sure they were working
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)