Hi
My Qashqai is in need of some TLC to a couple of alloys. The car had a couple of scuffs to the alloys when I bought it, should have insisted they be repaired before handing over my cash. I fitted some rimblades instead which covered the scuffs and they have done a good job. However two of the wheels are now starting to whiteworm, one is particularly bad,and looks awful.
My question is, has anyone had their diamond cut alloy wheels refurbished, and if so did they come up like new, and has the refurb lasted well?
I have seen a set of brand new Tekna alloys on e-bay with new Continental tyres and TPMS fitted for £895, which is a good price, so not sure whether I should just go ahead and get some new wheels?
I am sure it would be cheaper for a refurb, but don't want to waste money if the refurb is not good and lasts.
Thanks for any advice peeps.
Doug
Wheel refurbishment
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Doug, have not really had a problem with our Wheels at present. There are a couple of good posts on the Forum though that might be of help and give you some ideas or a better understanding of what is involved - Dave
viewtopic.php?f=28&t=973&p=10375&hilit= ... air#p10375
viewtopic.php?f=28&t=3937&p=37050&hilit ... air#p37050
viewtopic.php?f=28&t=973&p=10375&hilit= ... air#p10375
viewtopic.php?f=28&t=3937&p=37050&hilit ... air#p37050
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
- Gel
- Posts: 3265
- Joined: Thu May 22, 2014 12:02 pm
- Location: Thames Valley UK
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
You can only have diamond cuts skimmed once incidentally.
Yes they look as good as new after Refurb.
Yes they look as good as new after Refurb.
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol
-
- Posts: 381
- Joined: Fri Mar 17, 2017 12:47 pm
There is a lot to be said for steel wheels and a set of wheel trims I never thought I clean my wheels and my daughters focus as it takes longer to do than the car ........wheel trims are a lot the so we
Qashqai tekna 1.2 petrol dig 6. 3. 17. gunmetal grey. glass roof m\ t...............now RENAULT KADJAR GT 160 BHP same as the QQ same car
-
- Posts: 207
- Joined: Thu Feb 25, 2016 7:25 pm
- Location: East Sussex
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Thanks Gel. Thanks for the links Dave. I did put in a search for wheel refurb, but these links never popped up.
Magnetic Red 2015 Qashqai Tekna 1.6 Dci130 Xtronic. Now replaced with a Nissan Juke Tekna plus in Gunmetal Grey (2021)
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Doug, I had a set of these Alloys on a Nissan Note 1,6L always clean and undamaged until for the 1st time I used an Auto car wash with a moving belt and the Chain damaged a couple of the Spokes - never used again. The Wheel was skimmed and repaired but never really looked as it was when New and cost €140 on the wash insurance - Dave
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
-
- Posts: 207
- Joined: Thu Feb 25, 2016 7:25 pm
- Location: East Sussex
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Gel - I have been quoted £657.50 (inc VAT) to refurbish all 4 diamond cut alloys. Can I be really cheeky and ask if that is the sort of cost you were looking at?
Has anyone else had their diamond cuts refurbed and if so is the price I have been quoted reasonable?
It is hard to find anywhere local to me in East Sussex that actually can refurb such alloys.
Thanks as always for any input.
Doug
Has anyone else had their diamond cuts refurbed and if so is the price I have been quoted reasonable?
It is hard to find anywhere local to me in East Sussex that actually can refurb such alloys.
Thanks as always for any input.
Doug
Magnetic Red 2015 Qashqai Tekna 1.6 Dci130 Xtronic. Now replaced with a Nissan Juke Tekna plus in Gunmetal Grey (2021)
-
- Posts: 8623
- Joined: Wed Mar 19, 2014 12:39 pm
- Location: Berlin, Germany
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Doug, IMHO that price does not look that bad but perhaps Gel can confirm this. When you look on the Web for New Alloys there does not appear to be too many available anymore, perhaps because the new QQ J11B is now around. Prices quoted by Glyn Hopkins for New is around £285 each so your price ain‘t that bad. There are a lot of these Mobile Guys on the web that might be worth trying, but I would think skimming would get the best result - Dave
Have you tried these Guys which look to be around your area :
http://www.alloywheeldoctor.com/
http://wheelsrus.biz/
Have you tried these Guys which look to be around your area :
http://www.alloywheeldoctor.com/
http://wheelsrus.biz/
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
- Gel
- Posts: 3265
- Joined: Thu May 22, 2014 12:02 pm
- Location: Thames Valley UK
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
2 repaired at cost of £235 in 2015.
Price guide here from Kent based company, Lepsons.
http://www.lepsons.com/prices/
If you have 4 axle jacks & ability to remove wheels, you can send off to them.
Price guide here from Kent based company, Lepsons.
http://www.lepsons.com/prices/
If you have 4 axle jacks & ability to remove wheels, you can send off to them.
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol
No need for x4 axel jacks. Just find some Liverpool folks, they will have lots of bricks to put the car onto. Just make sure you keep an eye on the wheels & tyres as they will dissapear very quickly
Gel wrote: ↑Thu Oct 12, 2017 7:25 am 2 repaired at cost of £235 in 2015.
Price guide here from Kent based company, Lepsons.
http://www.lepsons.com/prices/
If you have 4 axle jacks & ability to remove wheels, you can send off to them.