duncho wrote: ↑Tue Jun 05, 2018 1:03 pm Yes correct, RGB strip is always on, but it is OK, because you need anyhow dim its intensity, otherwise it will be disturbing while you are driving. WW LED strip has full power of power supply and therefore it is very bright and completely overkills dimmed RGB strip light
Don't worry, just connect it to M54 or inner room light and you are good to go I think I posted details in my youtube video description.
thanks Duncho and lapalmeraielapalmeraie wrote: ↑Tue Jun 05, 2018 3:34 pm As I understood you didn’t managed to find the M54 connector. As you cas see in my Youtube video it is quite high up. Even with the glove box removed as you suggested. I wouldn’t botter. The R14, the connector of the three map lights in the front is way much easier to access.
As you understood you will need two seperate LED strips for your project. Both connected to + (violet) and the ground each to only one of the other cables. The one that remains lightened to black ground and the one that only lightens when the courtesy lights are on to the red ground.
ok i get it now duncho, in your video the white strip overkills so much the dimmed rgb strip that i thought you had installed some kind of switch between them.
I should place inline a 2-5A only to the V+ cable (violet) is that right?