No spare wheel.

Non-Technical Nissan QashQai chat. Mk2, Mk3
trout
Posts: 218
Joined: Thu Aug 02, 2018 9:06 pm
Location: Lake District.
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by trout »

Hi Terry, yes they are black covers, so the bolt head size is 21mm, and 17mm for the locking nut.
Thanks S.

Dan86
Posts: 11
Joined: Sun Jun 03, 2018 5:42 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Dan86 »

I have the black covers on my 2015 ntec+ with 18 inch wheels and the bolts under the cover are 17mm the same as the locking nut.
trout
Posts: 218
Joined: Thu Aug 02, 2018 9:06 pm
Location: Lake District.
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by trout »

Dan86 wrote: Sun Aug 12, 2018 9:20 am I have the black covers on my 2015 ntec+ with 18 inch wheels and the bolts under the cover are 17mm the same as the locking nut.
Well Dan, after a closer investigation you are correct sir, removed the plastic covers after I finally found the tool, and the studs are 17mm as well. :D
Much obliged, Steven.
Dan86
Posts: 11
Joined: Sun Jun 03, 2018 5:42 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Dan86 »

You're welcome.

I recently purchased a spare wheel as I don't trust the gunk that comes with the car I'd rather a space saver than a can of fome to get me out of trouble. I got a genuine Nissan one from eBay for £125 including delivery.
trout
Posts: 218
Joined: Thu Aug 02, 2018 9:06 pm
Location: Lake District.
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by trout »

I’ve found a matching alloy with near new tyre on eBay for £109.99 delivered, I don’t fancy being stuck either.
I did get the bottle of Slime as recommended on here which doesn’t ruin the tyre, it’s just loosing so much room in the boot with a full size spare.
Why they couldn’t leave a proper well to accommodate it is annoying.
S.
Dan86
Posts: 11
Joined: Sun Jun 03, 2018 5:42 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Dan86 »

That's why I got the space saver as it fits in the well it also came with Jack wheel brace and the polystyrene inserts to house it all. I'd prefer a proper full size but like you say it takes up to much space in the boot.

Atleast I know I can put on the spare wheel and carry on to a tyre shop to have the tyre replaced/ repaird without having to ruin the tyre with gunk or wait for the tax to come out.
trout
Posts: 218
Joined: Thu Aug 02, 2018 9:06 pm
Location: Lake District.
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by trout »

Dan86 wrote: Sun Aug 12, 2018 7:07 pm That's why I got the space saver as it fits in the well it also came with Jack wheel brace and the polystyrene inserts to house it all. I'd prefer a proper full size but like you say it takes up to much space in the boot.

Atleast I know I can put on the spare wheel and carry on to a tyre shop to have the tyre replaced/ repaird without having to ruin the tyre with gunk or wait for the tax to come out.
Dan, does the space saver fit flat under the carpet?
I tried my wife’s SS from her I10 and even that was quite proud of the well.
S.
Dan86
Posts: 11
Joined: Sun Jun 03, 2018 5:42 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Dan86 »

It fits nicely in the well only slightly taller than without out maybe a few mm but you don't lose the storage area under the flase floor.
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Steven, here is our setup in our QQ J11A and we can still leave the Flexible Cover over the Wheel + the Hard Floor 2x Section Floor. Yes you do loose space but if you need the satisfaction of having a Spare Wheel there is not much you can do. It is highly likely that you have a different setup in the J11B though which needs checking - Dave :D

91BCF8FA-3487-45E7-94C4-DE12DAFEC16F.jpeg

d
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
trout
Posts: 218
Joined: Thu Aug 02, 2018 9:06 pm
Location: Lake District.
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by trout »

Interesting picture Dave, I can now see how the added foam inserts around the SS make it all flat again.
Thanks very much.
Steven.
Post Reply