Damaged rolling parcel shelf

Bodywork & Interior problems
Post Reply
enterusername
Posts: 2
Joined: Thu Oct 04, 2018 10:09 am
Location: Norway
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by enterusername »

Have had my 2010 Qashqai +2 for a few years now it has been a reliable car and nice to drive.

However, a few weeks ago I heard a loud noise from the boot. One of the catches on the rolling parcel shelf had sheared off. (Attached an image below)

I have been trying to source replacement catches on ebay without much success (as it looks like there is a screw to remove the catch).

If I can't replace the catches then I assume I will have to source a used roller (around £150 on ebay).

Has this happened to anyone before? Any tips?

IMG_1588.jpg

User avatar
Gel
Posts: 3265
Joined: Thu May 22, 2014 12:02 pm
Location: Thames Valley UK
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Gel »

Try an online car breakers for whole unit or fabricate something suitable in metal.
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol :D
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

These two places might be worth a try - Dave :)

This place seems to be cheaper than eBay : https://www.partsgateway.co.uk/nissan-p ... rcel-shelf

Vospers seem to stock individual parts :
http://www.vospers.com/parts/genuine-ni ... -clip.html
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
scimitargtc
Posts: 135
Joined: Sat Nov 05, 2016 1:01 pm

Post by scimitargtc »

Have it 3 D printed?
2016 1.6 xtronic tekna diesel 130 bhp
1998 4.6 v8 Range Rover petrol auto 225 bhp
2019 Skoda Citigo 1.0 sel green tech 5 dr 75 bhp
2009 Vauxhall Astra Twintop 1.8 petrol sport 2 door 138bhp
enterusername
Posts: 2
Joined: Thu Oct 04, 2018 10:09 am
Location: Norway
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by enterusername »

Cheers for the tips!

The simplest solution looks like to get a used roller like the ones like DaveBerlin suggested on the Parts Gateway. The only problem is, with shipping and import tax to Norway it gets a bit more expensive. Not ruling it out though. A locally sourced roller is around NOK 1500 (£140) plus delivery. The ones from Parts Gateway might end up being a bit cheaper. It is just a bit daft as my roller works great, its the retainer clip that is broken. :lol:

The clips from Vospers seem to fit another type of parcel shelf.

However, 3D printing might be a really good shout!

I will take the mechanism apart and see what can be done... will report back after a bit more investigation.

Cheers,
User avatar
gloucester
Posts: 5173
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by gloucester »

Have you actually been to a dealer and asked them for a clip? That's the simplest solution...
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
Post Reply