FIRMWARE VERSION
send me PM including VIN of your car and your email
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
-
- Posts: 4
- Joined: Sun Dec 09, 2018 1:48 pm
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
Done
Enviado desde mi LG-H930 mediante Tapatalk
Enviado desde mi LG-H930 mediante Tapatalk
-
- Posts: 5
- Joined: Thu Jun 28, 2018 4:20 am
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Hello everyone,
I come to you to know if I can upgrade my version.
If it is possible that it would be the manipulation to perform.
Thank you for your help
I come to you to know if I can upgrade my version.
If it is possible that it would be the manipulation to perform.
Thank you for your help
Nope, you have LCN2Kai EVO version (newer unit).
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
-
- Posts: 5
- Joined: Thu Jun 28, 2018 4:20 am
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Only Nissan knowsleguyanais wrote: ↑Thu Jan 03, 2019 8:46 pm Will there be an update?
Is it possible to activate voice commands because they are disabled?
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
Hi,
I also got the error message that says "please use NissanConnect software download image only", any idea why? My stick USB is formatted Fat32 and I had the same folder structure in it as per the photo earlier in this thread and followed the instructions as per the guide. This message pops up almost immediately after hitting the update button.
Regards
Nick
No need, engine needs to be on and must not be turned off. Switch S/S off!!!!
Qashqai J11, 1.6 dCi CVT, ThermaClear
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
For latest news & tests Subscribe! to my Youtube channel
Order Stop/Start reversing & DRL dim/OFF modules!
Thanks for the quick reply. Still unsure at which step i can start the motor, turn off hazard lights and drive...
1. Unzip file to blank USB stick.
2 For IKey vehicles press the start/stop button once to enter "Ignition On" mode. Lower the drivers window to the down position. Press the hazard light switch to "ON" position and ensure the hazard lights are activated.
3. Insert the USB memory stick
4. Press and hold the "Setup" button and then turn the "Enter" button a half turn anticlockwise, then a half turn clockwise, then a half turn anticlockwise. The service menu will then appear. Release the "Setup"
5. Press the "Version" button on the screen.
6. Press the 'Update System Software' button. ' Press 'OK'.
7. will state 'Download Media Found'. Press the 'Update' button on the Nissan Connect screen.
8. After a 5 minute period, the screen will become active and a "Reading Medium" message will appear.
9. After the reprogramming update has finished a message will appear stating "Please remove USB Stick. System is shutting down". Remove
the stick. The screen may remain on this screen for up to 5 minutes. This is normal DO NOT alter the ignition position.
10. Press the "Accept" button. The reprogramming operation is now complete.
1. Unzip file to blank USB stick.
2 For IKey vehicles press the start/stop button once to enter "Ignition On" mode. Lower the drivers window to the down position. Press the hazard light switch to "ON" position and ensure the hazard lights are activated.
3. Insert the USB memory stick
4. Press and hold the "Setup" button and then turn the "Enter" button a half turn anticlockwise, then a half turn clockwise, then a half turn anticlockwise. The service menu will then appear. Release the "Setup"
5. Press the "Version" button on the screen.
6. Press the 'Update System Software' button. ' Press 'OK'.
7. will state 'Download Media Found'. Press the 'Update' button on the Nissan Connect screen.
8. After a 5 minute period, the screen will become active and a "Reading Medium" message will appear.
9. After the reprogramming update has finished a message will appear stating "Please remove USB Stick. System is shutting down". Remove
the stick. The screen may remain on this screen for up to 5 minutes. This is normal DO NOT alter the ignition position.
10. Press the "Accept" button. The reprogramming operation is now complete.