Bonnet not sitting flush to the grill

Bodywork & Interior problems
QQuestions
Posts: 22
Joined: Sun Dec 02, 2018 4:41 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by QQuestions »

Take a look at this guys ... one of these is my car - can you guess which one?

The bonnet does not lie flush with the grill. I've tried opening and closing it, still not aligned. Should I be worried that the car has a hidden history? Is this a normal manufacturing issue?

Screen Shot 2019-02-09 at 00.38.31.png

Noddy1875
Posts: 416
Joined: Sun Dec 09, 2018 2:37 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Noddy1875 »

How does it fit where it meets the wings ?
Pearl Black 65 reg Tekna. 1.5 DCI
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

You have a new J11B which I would think is with a Guarantee, if I was you I would get down to your Dealer and get it corrected. When we got our QQ in 14 we also had a Bonnet Problem but left to right misalighnment, I complained and it was corrected. Your problem seems to be that the Bonnet sits high, there are a couple of rubber buffers on our model which are adjustable attached to the underside of the Bonnet which could be the problem that it sits high. As mentioned by Noddy what does the sideways alignment look like, if you are worried about body damage then take a close look. But in the end I would get the Dealer to correct it - Dave 😉
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

These were what I was mentioning - Dave :)

8747FF95-18D9-470E-8209-A2132711F068.jpeg

You can see the round contact marking on the dirt :oops:

61ED45AF-F183-4B19-924E-E047A275BFC3.jpeg

OR :

3CCFA74F-0147-4F0E-ADC1-B42D1B552282.jpeg

EDA5AEDF-61BD-4EAD-9BFA-0B5F079E5223.jpeg

11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
QQuestions
Posts: 22
Joined: Sun Dec 02, 2018 4:41 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by QQuestions »

Guys, here's what the side alignment looks like.... I'll book it in for a dealer check too.

Screen Shot 2019-02-10 at 23.02.31.png

coys84
Posts: 28
Joined: Wed Aug 17, 2016 5:54 pm

Post by coys84 »

Those rubber bits dave mentions above adjust the height. Just turn anticlockwise i think
Noddy1875
Posts: 416
Joined: Sun Dec 09, 2018 2:37 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Noddy1875 »

Try winding the bungs in 1st. The reason I asked about the side view is, if you google j11b qashqais some look as bad as yours, some worse & some better. I'm not sure if it's a fault as such, or just poor finish. Could save yourself some hassle by having a good, nothing there to break.
Pearl Black 65 reg Tekna. 1.5 DCI
QQuestions
Posts: 22
Joined: Sun Dec 02, 2018 4:41 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by QQuestions »

Yep, I tried winding the bungs, no change. I don't think they are connected to anything to be honest (see attached).

Gosh, it's worrying to think that it's a manufacturing quality issue. Surely a bonnet is something Nissan has got used to fitting properly :)

Screen Shot 2019-02-11 at 20.34.58.png

Noddy1875
Posts: 416
Joined: Sun Dec 09, 2018 2:37 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Noddy1875 »

nissan-qashqai-2017-17126176-1_800X600.jpg

1-Nissan-QASHQAI.jpg

nissan_qashqai_2017_petrol_nissan_qashqai_1_2_dig_t_n_connecta_hatchback_2017_10550_miles_21000_2690120543420253501.jpg

None of these look much better than yours. I'm not sure it being black doesn't make it look worse.

nissan-qashqai-2017-17126176-1_800X600.jpg

Pearl Black 65 reg Tekna. 1.5 DCI
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

QQuestions, I reckon that Noddy has “Hit the Nail on the Head” if you look at nearly every photo there does appear to be a “Mismatch” of the Bonnet to the Main Headlight. If you look closely the “Mismatch” is from the Side Edge of the Headlight to the Front and the Gap gets Bigger. This appears to me to be a basic error in the positioning of the Headlight on the New QQ or we have a steel Bonnet Form that the Plastic Molding form does not match - Dave 🤨

280A63F3-7E7D-401E-BA42-D22DB405C591.jpeg

131D0250-DC9C-469C-9CF8-09EAAD9BAA82.jpeg

371EA3F3-4F9D-4AF7-939E-CFE62F506C70.jpeg

This is our QQ in 2014 when new and the Gap / Mismatch is not so pronounced 😊 :

B49ECDFD-112B-416D-AE8F-A6F212C2FCEC.jpeg

11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
Post Reply