Bonnet stay part question

Non-Technical Nissan QashQai chat. Mk2, Mk3
JessC1234
Posts: 2
Joined: Sun May 05, 2019 12:08 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by JessC1234 »

Hello,

So my other half was being helpful and topping up my screenwash for me.. when he went to pull the bonnet stay out of the panel in the engine bay by the lights the plastic mould for the hole fell through to the under tray.. I’ve added a picture I found on the internet.

Anyone know what the proper term or part number for the stupid plastic bit is!? I’ve been to Nissan twice physically showed them where I mean and ordered the bit the parts guy thought it was but both times it was the wrong one...

Any help would be great! :)

0E1DEDD0-6274-4DC4-8572-7318D08B73E6.jpeg

daddydoug
Posts: 207
Joined: Thu Feb 25, 2016 7:25 pm
Location: East Sussex
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by daddydoug »

You would think the dealership would know the correct part number, doesn't give you a lot of faith in Nissan. Get yourself some Bonnet struts to hold the bonnet up, then you don't need the bonnet stay! I expect a pair of bonnet struts on ebay will be cheaper than a bit of plastic from Nissan.

Good luck

Doug
Magnetic Red 2015 Qashqai Tekna 1.6 Dci130 Xtronic. Now replaced with a Nissan Juke Tekna plus in Gunmetal Grey (2021)
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Jess, you have confused me, we have a QQ J11 2014 Model and have never seen a Plastic Part in this hole. The Bonnet Stay has a pressed on Plastic Part that just locates into the QQ Body Hole or have I misunderstood - Dave 😉
The Body Stay with Pressed on Plastic Part located in Hole :

011385E9-B636-46DC-BD3B-B04852DB1C2E.jpeg

The Bonnet Hole (no Plastic Part) :

A1C47C77-3B9B-49C4-9DFB-75E93B77326D.jpeg

The Plastic Part on the Stay :

9AFAEC85-1978-4EC2-A9BE-F6F2F0ADA15E.jpeg

Years ago due to the weight of the Bonnet we installed a Strut Kit with Hydraulic Cylinders a real good investment !
If you have time and interest then take a read 🧐
viewtopic.php?f=31&t=2268&p=24891&hilit ... Kit#p24891
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
Qashowner
Posts: 564
Joined: Wed Apr 17, 2019 10:07 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Qashowner »

Dave, from the op's query, I would suggest it is the plastic bit you so eloquently show. It may have fallen off the end of the bonnet stay.
Past cars Mercedes B Class, S Class, E Class Estate, E Class Coupe, G Wagen, 260E interspersed with Peugeot 406 and Audi Coupe.
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Qashowner, you could well be correct - Thanks !. Normally this Part is a pretty good pressed fit on the rod, but if the rod was still located in the hole and the Bonnet was raised with force you could well be correct that the Plastic Part was ripped off - Dave ☹️
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

If it is the Plastic Part perhaps this is the way to go. Contact some Scrap Yards and buy a complete Rod second hand or purchase a Strut Kit - Dave 😉

A47F9632-B51E-4DDA-9BAD-4CD22442EF18.jpeg

F665CD2F-E9F7-4509-B542-902382AC26B8.jpeg

11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
Jacklee23
Posts: 1
Joined: Sat Sep 28, 2019 3:06 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Jacklee23 »

Need a
bonnet stay rod complete for a j11 but looked everywhere please help
User avatar
gloucester
Posts: 5173
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by gloucester »

Welcome to this forum

Why can't you find one at a dealer?
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
Kiwi Paul
Posts: 9
Joined: Thu Aug 08, 2019 12:43 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Kiwi Paul »

Hi Guys , I was disappointed that my 2016 QQ st did not come standard with bonnet struts ( the Bonnet is a real solid hunk of metal ) I purchased my pair for around 35$nz plus freight.. and they fitted straight off. I purchased mine from either wish or aliexpress , cant remember Best wishes Paul
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

Kiwi Paul, if you are interested in History take a look at this Long Post on the Bonnet Struts. The original intention was to knock a set up for the Forum, but then a member found a Kit in Russia and a Batch was purchased - after all these years they still work perfect. The Kits then started to appear all over, Accessory Dealers here, AliExpress, eBay etc. IMHO one of the better additions to the QQ for a minimal expense and installation time - Dave 😊

https://www.qashqaiforums.co.uk/viewtopic.php?f=17&t=2272&hilit=bonnet%23#p24914
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
Post Reply