Changing Ignition Barrels

ICE, Equipment, Options
UlsterRugby
Posts: 3
Joined: Sat Jul 20, 2019 1:37 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by UlsterRugby »

Hi all

Hopefully someone can give me a pointer here. I have a 2009 QQ and the 2 key fobs will not lock the car. Ive researched this problem in great depth and it is 95% likely that the barrel needs replacing. So three quick questions if I may.
  • 1: If I buy a new barrel I assume that this should come with a new set of keys. Do these keys need to be programmed to suit the ECY etc?
  • 2: Is this a difficult job to undertake?
  • 3: Are there any issues that I need to know about while doing this job?
Many thanks in advance.

User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

Some info:
I've done a similar job on a BMW 525 (1997)...ignition. There are insurance industry requirements for this subject to prevent the barrel being smashed/compromised/removed and/or contactor/ignition override/jumped. The BMW key at that year had an electronic chip that communicated with the ECU via a magnetic coil around the key barrel holder. I've had to show my passport/council tax at BMW to get a new key and that was programmed to my car. Its somewhat more sophisticated now perhaps, but:

Issues:
You'll need to inspect the barrel fixings first because in the case of the BMW its likely the barrel housing is bolted in with snap off heads at manufacture. Tricky fixings anyway.
And where the barrel joins the ignition contactor the shaft is weakened. My problem was that that weakened shaft gave in on me with the car at 10 years old so disabling the car 1 mile from home. Security aim being to prevent barrel compromise by screwdrivers etc.

Getting the steering wheel off and out of the way may be an issue with the air bag initialisation. It wasn't on the BMW....scary stuff though. I know it can be an issue though particularly if the steering wheel assy is removed with the car battery connected.

The key fobs will have to be registered to the car and likely by Nissan

It certainly was not a fun job.
Last edited by calnorth on Thu Oct 24, 2019 9:32 am, edited 1 time in total.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
UlsterRugby
Posts: 3
Joined: Sat Jul 20, 2019 1:37 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by UlsterRugby »

many thanks calnorth for your reply. I assumed it would be a tricky job to do. I think I will keep researching this before I attempt to do it.
User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

UlsterRugby wrote: Tue Oct 22, 2019 7:45 am many thanks calnorth for your reply. I assumed it would be a tricky job to do. I think I will keep researching this before I attempt to do it.
A thing you might look at which may or may not impact on your DIY aspiration. The BMW was of course old technology and did not require a special tool (electronic config) to register keys to the ECU by interacting with the ECU directly. So changing the lock in part or whole did not prevent the car from running normally after such surgery by me.

Nissan uses its CONSULT tool (diagnostics & setup/installation) for setting and initialising a number of sub systems on the car including Security, Brakes, Cameras etc. So apart from registering the new key fob there could be other parts of procedure that need electronically configuring to enable the car to operate normally after surgery?

Security is aimed at prevention of car theft which as I discovered also aims at the likes of me digging into it. Electronically disabling a car on fault condition/attack is quite something else and would thwart my old and large toolbox. CONSULT is quite a few thousand pounds and eBay won't be the place to go.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
Qashowner
Posts: 564
Joined: Wed Apr 17, 2019 10:07 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Qashowner »

If it's only not locking the car only, you have checked the batteries in the key fobs?
Past cars Mercedes B Class, S Class, E Class Estate, E Class Coupe, G Wagen, 260E interspersed with Peugeot 406 and Audi Coupe.
Lusky
Posts: 45
Joined: Sun Aug 11, 2019 7:34 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Lusky »

Why would 2 car keys not lock the car? Seems odd. Call me a cynic but..........
2015 QASHQAI N-TEC + DIG-T 5 DOOR HATCHBACK PETROL. BLUE.
User avatar
gloucester
Posts: 5173
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by gloucester »

Lusky wrote: Tue Oct 22, 2019 8:44 pm Why would 2 car keys not lock the car? Seems odd. Call me a cynic but..........
I presume the scenario is a broken barrel - pins bent or misaligned.
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
Qashowner
Posts: 564
Joined: Wed Apr 17, 2019 10:07 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Qashowner »

I have read this again and I am confused. The OP has only stated that his keys will not lock the car, nothing about if they will start the car or unlock the car, totally confused.
Past cars Mercedes B Class, S Class, E Class Estate, E Class Coupe, G Wagen, 260E interspersed with Peugeot 406 and Audi Coupe.
UlsterRugby
Posts: 3
Joined: Sat Jul 20, 2019 1:37 pm
Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)

Post by UlsterRugby »

Sorry, I have been off the map for a while and I didnt see the last posts.

Qashowner - the keys (as in key fobs) will not lock the car. The actual key will lock the drivers door only. I have since discovered that the key lock barrel has one tumbler which activates the steering lock (which I have now found is not activated). The barrel fault, whatever it actually is, prevents the ECU from allowing the key fob to operate the central locking.

I visited a Nissan dealer back home and he spent quite some time with me explaining how it all works. So basically, the last tumbler does not engage and, therefore, the steering lock is not engaged and the ECU believes that the key is still in the barrel and, therefore, will not allow the key fob to lock the car.

The result is that the barrel lock cylinder needs to be changed. The cost, quoted by a local Nissan dealership here in France could exceed 800€.

I am trying to find an online trader who can supply a new barrel cylinder lock and keys but I am not having much luck.

I am hoping to do this job myself and I will search for videos on how to do this. If any of you good folk have any suggestions Ii am all ears.

Thanks in advance.
User avatar
Gel
Posts: 3265
Joined: Thu May 22, 2014 12:02 pm
Location: Thames Valley UK
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Gel »

Several YouTube videos on changing out a QQ steering wheel lock :)
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol :D
Post Reply