Clutch clicking

Forum for Engine, Exhaust, Drivetrain, ECU
Valleyboy22
Posts: 48
Joined: Sat Aug 10, 2019 3:53 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Valleyboy22 »

Hi all,

Got a 2011 QQ ntec+ which i have had for around 3 months now.

It had a new clutch and cam belt fitted before i purchased.

I have now noticed now and again i get a clicking noise from the clutch when i depress it? It does not happen all the time, but a tad worried that something will eventually go on it.

Any advice please?

Thanks

User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

Is that a click inside or outside the cab? Inside is the easy bit I'd say.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
Valleyboy22
Posts: 48
Joined: Sat Aug 10, 2019 3:53 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Valleyboy22 »

clicking from the inside.
Valleyboy22
Posts: 48
Joined: Sat Aug 10, 2019 3:53 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Valleyboy22 »

Thought it was my trainers doing it, but its not i have found out.
User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

All I can say is have a close look around the clutch pedal....pull it about a bit. Check for anything obstructing its movement.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
Valleyboy22
Posts: 48
Joined: Sat Aug 10, 2019 3:53 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Valleyboy22 »

Will do thanks.
Pandjh
Posts: 770
Joined: Sat Feb 04, 2017 11:34 am
Location: South-East England
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by Pandjh »

I had that on my first QQ. It was a switch attached to the clutch pedal mechanism that needed adjusting.
2019 1.3 DiG-T 160 Tekna, black (J11b)
prev 2015 1.2 DiG-T n-tec+, black (J11)
prev 2009 1.5 dCi Acenta, black (J10)
Valleyboy22
Posts: 48
Joined: Sat Aug 10, 2019 3:53 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Valleyboy22 »

can i access this from inside the car?
Pandjh
Posts: 770
Joined: Sat Feb 04, 2017 11:34 am
Location: South-East England
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by Pandjh »

Yes, but you need to lay upside down in the footwell to work on it easily iirc. Its all within reach (remember, this was a 2009 QQ).
2019 1.3 DiG-T 160 Tekna, black (J11b)
prev 2015 1.2 DiG-T n-tec+, black (J11)
prev 2009 1.5 dCi Acenta, black (J10)
Valleyboy22
Posts: 48
Joined: Sat Aug 10, 2019 3:53 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Valleyboy22 »

This will be fun lol. So I'm looking for a switch of some sort?
Post Reply