Hi all,
If I could ask for your assistance please!?
I’m currently fitting the stop start model that I received from Daniel, and I’m at the point of fitting the fuse behind the panel on the right of the dash.
( battery always disconnected during this) The recommended point is the “meter IG” fuse, but when this is pulled I lose all instrumentation.
So, I’m assuming the labelling on the fuse cover is incorrect. I’ve attached a pic of my fuses ( suggested one circled) and the cover that shows the fuse allocations.
So..... I’m not sure where to fit the start stop module. I note it came with a 2 fuse in it. The suggested fuse is a 10..... can’t be that can it? Didn’t want to risk changing the fuse and frying the module.
Qashqai 1.2 Digi-T 2016 model fuses
- gloucester
- Posts: 5194
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
I don't know of the module you're fitting ,but isn't it logical that the DCDC_METER_IG fuse controls the instruments? Meters - ignition switched?
Are you piggybacking the fuses?
Are you piggybacking the fuses?
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
- gloucester
- Posts: 5194
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
The instructions here:
... are referring to the other internal fusebox.
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
The module comes fitted with a short piggy back wire that will only reach to that fuse box. It is the correct fuse box but I can’t tell which fuse slot to put it into. I followed the instructions as per but they are for a different model it seems.
Ok..... I’m going to confess something. It’s just occurred to me that I should take the removed 10a fuse and push it into the empty slot on the pigggback holder. I haven’t used These before. It’s all working now!
Believe it or not I actually work with pretty sophisticated Subsea robots, lots of electronics and hydraulics...🥴 but never seen these before!
Believe it or not I actually work with pretty sophisticated Subsea robots, lots of electronics and hydraulics...🥴 but never seen these before!
- gloucester
- Posts: 5194
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Hence my question "Are you piggybacking the fuses?"
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
- gloucester
- Posts: 5194
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
They're probably still using Windows XP!
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)