Qashqai 1.2 Digi-T 2016 model fuses

ICE, Equipment, Options
Post Reply
Archie074
Posts: 4
Joined: Sat Nov 23, 2019 3:47 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Archie074 »

Hi all,
If I could ask for your assistance please!?

I’m currently fitting the stop start model that I received from Daniel, and I’m at the point of fitting the fuse behind the panel on the right of the dash.
( battery always disconnected during this) The recommended point is the “meter IG” fuse, but when this is pulled I lose all instrumentation.
So, I’m assuming the labelling on the fuse cover is incorrect. I’ve attached a pic of my fuses ( suggested one circled) and the cover that shows the fuse allocations.

So..... I’m not sure where to fit the start stop module. I note it came with a 2 fuse in it. The suggested fuse is a 10..... can’t be that can it? Didn’t want to risk changing the fuse and frying the module.

BE62C3B6-0FF4-4405-89B2-2E592AC541B7.jpeg

C080109F-0890-4740-BBBA-9A310D524BA3.jpeg

User avatar
gloucester
Posts: 5173
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by gloucester »

I don't know of the module you're fitting ,but isn't it logical that the DCDC_METER_IG fuse controls the instruments? Meters - ignition switched?

Are you piggybacking the fuses?
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
User avatar
gloucester
Posts: 5173
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by gloucester »

The instructions here:
duncho wrote: Sat Mar 09, 2019 8:15 pm Here is S/S installation manual for Qashqai J11 and X-Trail T32:
https://docs.google.com/file/d/1B-bFuosC9VU8OHmPxZsy-nIt5KYhI-bR
... are referring to the other internal fusebox.
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
Archie074
Posts: 4
Joined: Sat Nov 23, 2019 3:47 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Archie074 »

This is the fuse box on the driver side, behind the small panel that would be hidden by the door.
Archie074
Posts: 4
Joined: Sat Nov 23, 2019 3:47 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Archie074 »

The module comes fitted with a short piggy back wire that will only reach to that fuse box. It is the correct fuse box but I can’t tell which fuse slot to put it into. I followed the instructions as per but they are for a different model it seems.
Archie074
Posts: 4
Joined: Sat Nov 23, 2019 3:47 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Archie074 »

Ok..... I’m going to confess something. It’s just occurred to me that I should take the removed 10a fuse and push it into the empty slot on the pigggback holder. I haven’t used These before. It’s all working now!


Believe it or not I actually work with pretty sophisticated Subsea robots, lots of electronics and hydraulics...🥴 but never seen these before!
User avatar
gloucester
Posts: 5173
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by gloucester »

:lol: :lol: :lol: Hence my question "Are you piggybacking the fuses?"
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
User avatar
gloucester
Posts: 5173
Joined: Sun Apr 03, 2016 7:04 am
Location: Gloucestershire, England
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by gloucester »

Archie074 wrote: Mon Jan 13, 2020 3:21 pm Believe it or not I actually work with pretty sophisticated Subsea robots, lots of electronics and hydraulics...🥴 but never seen these before!

They're probably still using Windows XP!
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
Post Reply