FIRMWARE VERSION

ICE, Equipment, Options
Post Reply
Rastafara
Posts: 3
Joined: Mon Jul 27, 2020 5:25 pm
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by Rastafara »

andy2019 wrote: Mon Jul 27, 2020 10:14 pm think you may find that the firmware update isn`t for your system thats why it won`t upgrade
Thank you, andy2019, can anybody guide me to the right update?

Rastafara
Posts: 3
Joined: Mon Jul 27, 2020 5:25 pm
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by Rastafara »

Rastafara wrote: Mon Jul 27, 2020 5:46 pm I have an Xtrail (T32) with firmware version D010 (I know, vintage) and hardware version 31.

I have just joined but have read the whole Firmware thread, downloaded the firmware on page 44 and loaded it on a fully formatted FAT32 8GB USB drive. (4.5 GB free space left)

The update starts but fails after initializing.
At the start it says updatable data identified, onboard version is 010, media version is XXXX.

I would be grateful for help with the following questions:

Is hardware 31 working with firmware D605?
Why is the system not able to identify the firmware version on the USB drive (media version)?
Is this the reason why it fails? What can I do?
Do I need to take an intermediate step to get from 010 to 605?
Is it an issue that for the time being I do not have an SD card in the slot?

Thank you very much in advance for any hints to solving the issue.
Does anybody have an idea how I can find the right update?
User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

Rastafara wrote: Fri Jul 31, 2020 9:55 am
Rastafara wrote: Mon Jul 27, 2020 5:46 pm I have an Xtrail (T32) with firmware version D010 (I know, vintage) and hardware version 31.

I have just joined but have read the whole Firmware thread, downloaded the firmware on page 44 and loaded it on a fully formatted FAT32 8GB USB drive. (4.5 GB free space left)

The update starts but fails after initializing.
At the start it says updatable data identified, onboard version is 010, media version is XXXX.

I would be grateful for help with the following questions:

Is hardware 31 working with firmware D605?
Why is the system not able to identify the firmware version on the USB drive (media version)?
Is this the reason why it fails? What can I do?
Do I need to take an intermediate step to get from 010 to 605?
Is it an issue that for the time being I do not have an SD card in the slot?

Thank you very much in advance for any hints to solving the issue.
Does anybody have an idea how I can find the right update?

You should expect that the Box will perform some kind of file verification on upload...and stop if not recognised. Also. if the USB stick is invalid somehow. If the update is not hanging about on the web you'll need to ask Nissan i suspect. This is a QQ site and so we would likely have no knowledge of Xtrail devices/configuration.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
karhulitos
Posts: 5
Joined: Thu Apr 11, 2019 3:54 pm
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by karhulitos »

karhulitos wrote: Wed Jul 22, 2020 1:53 pm Hi, sorry to reply on a very old post.

The story continues and today the unit was dismounted as I promised to my wife to peek inside to see if the failure (Update failed, COMMAND: script.lua:281 remoteExec) indeed was hardware related. And yes, it was. A chip, STA662 was burned and, according to the almighty Internet, it is responsible of radio and most audio tasks, and more importantly, is reprogrammable. Perfect root cause for the update failure.

Radio did fail before the whole box was bricked with garage's update attempt. So it wasn't shop's fault but the unit itself.

Albeit I can solder I couldn't even find or see any (home) means to replace the chip. So next step is: another unit from eBay.
Sorry about a bit off topic.

Today the UK second hand unit arrived. I wanted to see if it's physically OK and plugged it in. It said contact your dealer status "red". I assume it detected it is in wrong vehicle. Any idea can the new unit be reprogrammed with home gear to fit wifeys QQ? A quick googling didn't lead me anywhere.

[edit] now found keyword "Consult 3+", so to shop it is..
User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

Consult is a Nissan proprietary test, diagnostic and configuration tool. Not for sale anywhere.
Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
raul79
Posts: 2
Joined: Tue Aug 04, 2020 7:23 am
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by raul79 »

Hi all,
few weeks ago, my juke had a problem. The problem is described in a Nissan Service Bullettin, n. NTB15-011b, dated November 1, 2018.

Pratically, A status message “Update Failed !” is displayed with a direction to “Insert update media” while a countdown from 60 is displayed. The audio system then reboots (Nissan Logo appears), and then will restart the countdown.

I am trying to update the firmware with the latest available, D605.

I tried several times, with different PenDrive USB, but the update procedure always fails at 58%, when this message is shown on the display: "Check NOR FS".

Can anyone help me?
Thanks!
User avatar
MikeGC
Posts: 1852
Joined: Tue Feb 07, 2017 11:50 am
Location: Stockport
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by MikeGC »

raul79 wrote: Tue Aug 04, 2020 7:36 am Hi all,
few weeks ago, my juke had a problem. The problem is described in a Nissan Service Bullettin, n. NTB15-011b, dated November 1, 2018.

Pratically, A status message “Update Failed !” is displayed with a direction to “Insert update media” while a countdown from 60 is displayed. The audio system then reboots (Nissan Logo appears), and then will restart the countdown.

I am trying to update the firmware with the latest available, D605.

I tried several times, with different PenDrive USB, but the update procedure always fails at 58%, when this message is shown on the display: "Check NOR FS".

Can anyone help me?
Thanks!
.
You might get a more detailed answer here - Nissan Juke Forum.
Good Luck

https://www.jukeforums.co.uk/search.php ... ive_topics
March '22 - J12 1.3DIG-T 160 CVT Tekna+ with all wheel drive - Pearl Black
July '19 - J11B 1.3DIG-T 160 DCT Tekna - Vivid Blue
March '17 - Qashqai J11A 1.5dci n-connecta - gunmetal
September '14 - Juke 1.5dci gunmetal ascenta premium (red accent packs)
User avatar
MikeGC
Posts: 1852
Joined: Tue Feb 07, 2017 11:50 am
Location: Stockport
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by MikeGC »

Rastafara wrote: Tue Jul 28, 2020 4:25 pm
andy2019 wrote: Mon Jul 27, 2020 10:14 pm think you may find that the firmware update isn`t for your system thats why it won`t upgrade
Thank you, andy2019, can anybody guide me to the right update?
.
when I looked at buying an X-Trail last year, these folks were really informative

https://www.x-trail-uk.co.uk/
March '22 - J12 1.3DIG-T 160 CVT Tekna+ with all wheel drive - Pearl Black
July '19 - J11B 1.3DIG-T 160 DCT Tekna - Vivid Blue
March '17 - Qashqai J11A 1.5dci n-connecta - gunmetal
September '14 - Juke 1.5dci gunmetal ascenta premium (red accent packs)
raul79
Posts: 2
Joined: Tue Aug 04, 2020 7:23 am
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by raul79 »

MikeGC wrote: Tue Aug 04, 2020 7:51 am
raul79 wrote: Tue Aug 04, 2020 7:36 am Hi all,
few weeks ago, my juke had a problem. The problem is described in a Nissan Service Bullettin, n. NTB15-011b, dated November 1, 2018.

Pratically, A status message “Update Failed !” is displayed with a direction to “Insert update media” while a countdown from 60 is displayed. The audio system then reboots (Nissan Logo appears), and then will restart the countdown.

I am trying to update the firmware with the latest available, D605.

I tried several times, with different PenDrive USB, but the update procedure always fails at 58%, when this message is shown on the display: "Check NOR FS".

Can anyone help me?
Thanks!
.
You might get a more detailed answer here - Nissan Juke Forum.
Good Luck

https://www.jukeforums.co.uk/search.php ... ive_topics

Unfortunately I have not found anything on the other forum, there isn't a such detailed thread on the firmware update.
Can anyone tell me how can i fix the error i get?
User avatar
calnorth
Posts: 2719
Joined: Mon Feb 11, 2019 2:01 pm
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by calnorth »

The Nissan Bulletin is below and which starts with software D407 from Bosch. If that is established you need to ask Nissan about any further update...that is valid for the Juke. The Bulletin does not refer to Qashqai, so assistance from this site is unlikely.

https://static.nhtsa.gov/odi/tsbs/2018/ ... 1-9999.pdf

Also Note:

020-08-06_123740_.png

Mk2 Qashqai Facelift - J11b (2017–and onward)
1.6 Dig-T N-Connecta
Post Reply