Hi,
Odd issue. For the past week the clock won't automatically set to the correct time when set to AUTO.
Anyone ever had this? Its a N-connector 2019 version only 9 months old.
Thanks
Clock wrong
- Weasel
- Posts: 394
- Joined: Sun May 26, 2019 6:31 am
- Location: West Yorkshire
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Mine has done it before, set it to manual for a couple of days, then back to auto and it sorted itself out.
Think at the time there was something wrong with the satellite that controls the time signal, can't remember the exact name for it.
Think at the time there was something wrong with the satellite that controls the time signal, can't remember the exact name for it.
19 plate 1.5dCi n-connecta in Magnetic Red
- Weasel
- Posts: 394
- Joined: Sun May 26, 2019 6:31 am
- Location: West Yorkshire
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
Very strange, reset the time and try again, give it 5 minutes then switch back to auto and see what happens.
Could be a battery issue, they're aren't the best on the Qash.
Could be a battery issue, they're aren't the best on the Qash.
19 plate 1.5dCi n-connecta in Magnetic Red
-
- Posts: 336
- Joined: Sat Feb 23, 2019 7:27 am
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
Which unit do have connect 3? Connect 3 evo? Or the new alliance nissan connect with no SD card
-
- Posts: 788
- Joined: Sat Feb 04, 2017 11:34 am
- Location: South-East England
- Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)
I had this too, leave it on manual for a couple of days then reset to auto. Worked for me.
2019 1.3 DiG-T 160 Tekna, black (J11b)
prev 2015 1.2 DiG-T n-tec+, black (J11)
prev 2009 1.5 dCi Acenta, black (J10)
prev 2015 1.2 DiG-T n-tec+, black (J11)
prev 2009 1.5 dCi Acenta, black (J10)