Fixing new floor mats

Bodywork & Interior problems
Shefffielder
Posts: 21
Joined: Sun Jan 03, 2021 11:50 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Shefffielder »

Can anyone tell me if this is how the floor studs are supposed to be/look?

Do I have to take that ring off the stud or is it supposed to be there?

IMG_6797.jpeg

Shefffielder
Posts: 21
Joined: Sun Jan 03, 2021 11:50 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Shefffielder »

Here is the underside of the mats I bought

IMG_6795 2.jpeg

Shefffielder
Posts: 21
Joined: Sun Jan 03, 2021 11:50 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Shefffielder »

Here is the floor stud thing it's supposed to snap onto

IMG_6797 2.jpeg

Shefffielder
Posts: 21
Joined: Sun Jan 03, 2021 11:50 am
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Shefffielder »

I have a gut feeling I have to take off that ring on the studs but I dont' want to if it's factory fitted or if it will damage the car
DaveBerlin
Posts: 8623
Joined: Wed Mar 19, 2014 12:39 pm
Location: Berlin, Germany
Qashqai Model: Mk.2 Qashqai Facelift - J11b (2017–2021)

Post by DaveBerlin »

I think that you have to remove that Ring and then you can Pop the other part onto it. Try lifting it by putting a thin wide screwdriver or steel rule under it and lifting it gradually or as mentioned pop down to Nissan to clarify the problem if you are uneasy - Dave 🤗
11.19/1.3L/160PS/Tekna+/DCT/PrOPILOT/KAD Gun Metallic/Trunk Lower Finisher/Rear Glass Finisher/Ambient Lighting-LED’s Innen/Entry Guards Illuminated/Sport Pedals/Front Styling Plate/LED No.Plate/Chrome Door Handles/Rear Valance/Giacuzzo Alloys + Falken
Post Reply