Using REVIVE on a 1.5tdi

Forum for Engine, Exhaust, Drivetrain, ECU
Post Reply
Trail71
Posts: 12
Joined: Thu Jan 14, 2021 6:30 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Trail71 »

I can't find any related posts via search so have posted a new question

Having turbo/boost issues on my Qashqai

Have been recomended to try Revive Turbo cleaner - which involves disconnecting the turbo inlet and injecting the solution directly into the trubo intake after the MAF sensor

Problem is - the car just wont start if the turbo intake pipe is not connected

Is there something obvious I'm doing wrong?

Thanks ;)
Nissan Qashqai 2010 1.5 DCi J10 FWD

Trail71
Posts: 12
Joined: Thu Jan 14, 2021 6:30 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Trail71 »

OK - so I'm confused - as to which part of the system is the inlet pipe?

Any off these right?

inlet pipe.jpg

Nissan Qashqai 2010 1.5 DCi J10 FWD
Trail71
Posts: 12
Joined: Thu Jan 14, 2021 6:30 pm
Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)

Post by Trail71 »

All sorted - it is number 2 on that photo

Revive spray used - and hopefully so far, the limp mode boost issue seems to be fixed (fingers crossed)
Nissan Qashqai 2010 1.5 DCi J10 FWD
Post Reply