Qashqai wont start
-
- Posts: 6
- Joined: Thu Jul 21, 2022 7:38 am
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
Had a different sound on the car, thought it was the exhaust blowing. Drove 10 miles and returned only for the car to lose acceleration. After 2 miles lost power then I coulnt continue. The car now wont start with no codes. Any help would be great.
- gloucester
- Posts: 5189
- Joined: Sun Apr 03, 2016 7:04 am
- Location: Gloucestershire, England
- Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)
Welcome to this forum
Can I suggest you advise what engine you have.
By "won't start" what is the issue in more detail - for example, is the starter motor turning the engine? If so is it not firing?
Any signs in the engine compartment.
I won't actually be able to diagnose but others might be able to.
Can I suggest you advise what engine you have.
By "won't start" what is the issue in more detail - for example, is the starter motor turning the engine? If so is it not firing?
Any signs in the engine compartment.
I won't actually be able to diagnose but others might be able to.
(2015 Nissan Qashqai Tekna DIG-T 1.2 sold 15/6/18) ~ 2018 Suzuki Ignis SZ5 - 2018 Yamaha MT-07 ~ (2024 Volvo EX30 ordered)
-
- Posts: 6
- Joined: Thu Jul 21, 2022 7:38 am
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
Its a qashqai 2.0 dci diesel It is turning over and not firing. The red light was on when the AA turned up. There was about 8 errors on the aa report, he said to change the canshaft sensor which happened now no code and no start.
- MikeGC
- Posts: 1872
- Joined: Tue Feb 07, 2017 11:50 am
- Location: Stockport
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
.
Welcome to the forum but I have absolutely no idea.
Hopefully someone more technically minded will be able to help you soon
March '22 - J12 1.3DIG-T 160 CVT Tekna+ with all wheel drive - Pearl Black
July '19 - J11B 1.3DIG-T 160 DCT Tekna - Vivid Blue
March '17 - Qashqai J11A 1.5dci n-connecta - gunmetal
September '14 - Juke 1.5dci gunmetal ascenta premium (red accent packs)
July '19 - J11B 1.3DIG-T 160 DCT Tekna - Vivid Blue
March '17 - Qashqai J11A 1.5dci n-connecta - gunmetal
September '14 - Juke 1.5dci gunmetal ascenta premium (red accent packs)
- QashqaiSilver
- Posts: 275
- Joined: Sun Jan 09, 2022 10:35 pm
- Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)
What are the error codes? As for the crankshaft sensor, or camshaft sensor (if fitted) when they go bad can fail to make a car start as the engine cannot determine Top Dead Centre position.
If you have not changed that, you need to get it changed.
J10, 2008, 1.6 petrol, Acenta
-
- Posts: 6
- Joined: Thu Jul 21, 2022 7:38 am
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
I have changed the cam sensor and this is the AA was getting
Engine control - 57Z / Diesel EDC 16CP33 Status :P0560 - System power supply. Error Message : Faulty. Error static. Status :P0340 - Camshaft position sensor. Error Message : Faulty. Error static. Status :P0670 - Glow duration control unit. Error Message : Open circuit/short circuit. Error static. Status :P0606 - Engine control unit. Error Message : Faulty. Error static. Status :P062B - Engine control unit. Error Message : Faulty. Error static. Status :P2A00 - O2 sensor (bank 1, sensor 1). Error Message : Signal outside specified range. Error static.P253F - Unknown fault. Error Message : Unknown error type (22). Status :P1525 - Cruise control. Error Message : MIL with cruise control active. Error sporadic.We have recovered your vehicle.Above codes in memory requires investigating Engine Oil Level Ok. Coolant Level Ok.
My mechanic seems to think its the timing chain.
Engine control - 57Z / Diesel EDC 16CP33 Status :P0560 - System power supply. Error Message : Faulty. Error static. Status :P0340 - Camshaft position sensor. Error Message : Faulty. Error static. Status :P0670 - Glow duration control unit. Error Message : Open circuit/short circuit. Error static. Status :P0606 - Engine control unit. Error Message : Faulty. Error static. Status :P062B - Engine control unit. Error Message : Faulty. Error static. Status :P2A00 - O2 sensor (bank 1, sensor 1). Error Message : Signal outside specified range. Error static.P253F - Unknown fault. Error Message : Unknown error type (22). Status :P1525 - Cruise control. Error Message : MIL with cruise control active. Error sporadic.We have recovered your vehicle.Above codes in memory requires investigating Engine Oil Level Ok. Coolant Level Ok.
My mechanic seems to think its the timing chain.