Very handy guide here. Worthy of note is that the torx screw holding the door handle is a T20 as they mention and not a T10 as in the official Nissan Qashqai workshop manual for the J10. Also this screw does not need to be screwed all the way out.
How to change front door handle on Nissan Qashqai J10 – replacement guide
https://club.autodoc.co.uk/pdf-manuals/ ... -guide.pdf
How to change front door handle on Nissan Qashqai J10 – replacement guide
- QashqaiSilver
- Posts: 275
- Joined: Sun Jan 09, 2022 10:35 pm
- Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)
J10, 2008, 1.6 petrol, Acenta
- QashqaiSilver
- Posts: 275
- Joined: Sun Jan 09, 2022 10:35 pm
- Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)
The dimensions are. It is a 7.8mm in the caliper. The pitch thread depth is 1.1mm. Total length of screw is 17.9mm
J10, 2008, 1.6 petrol, Acenta