Plastic door mouldings on bottom of exterior car doors

General / Ordering Forum for the new 2021 (J12) Qashqai
Post Reply
Eddie1
Posts: 14
Joined: Thu Apr 28, 2022 9:23 pm
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by Eddie1 »

Hi, I have had my car for only 2 weeks and have noticed that rain appears to run through the gaps where the moulding is not touching the door at the bottom and comes out at the bottom where it is clipped under the door inside. I don’t know if the double sided tape is coming loose or not. Does anyone else have this problem.

C0C8A445-3363-4D7F-B496-A7253F7DD463.jpeg

94E93E4F-0EF3-4DC0-9C2E-C8F2F4707D40.jpeg

6A923580-2CDA-4572-AEBF-7B8B7AE4AC86.jpeg

TIA

Steve101
Posts: 133
Joined: Sun Oct 31, 2021 6:01 pm
Qashqai Model: Still looking for one....

Post by Steve101 »

I have J12. I don’t have that problem. Doesn’t looked clipped in properly. Have you tried just pushing it in. When my j 12 arrived, the black trim over the wheel arch needed pushing in!
Tekna J12, magnetic blue, black roof.
Eddie1
Posts: 14
Joined: Thu Apr 28, 2022 9:23 pm
Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model

Post by Eddie1 »

I have tried to push it in on the areas where there is gaps but it just springs back. The bottom of the rear door was loose also but it clipped in when I pushed it together I think it is taped along the top and has sprung loose. The rear wheel arch trim is also loose but will not push in so it is going back in to get it sorted along with a couple of other issues ie screw lying under the front passenger seat and centre console side panel loose in front passenger foot well.
User avatar
Gel
Posts: 3265
Joined: Thu May 22, 2014 12:02 pm
Location: Thames Valley UK
Qashqai Model: Mk.2 Qashqai - J11 (2013–2017)

Post by Gel »

One for the dealer to sort under warranty ;)
2014-19 J11A-14 1.5dci Ink Blue Tekna owner; now departed for a Mazda CX-5 GT Sport Nav, 2.0L Petrol :D
Post Reply