Dongar confirmed to me that the "ECONOMY 7-PIN" is compatible with the J12 Qashqai mirror.
https://dongar.tech/products/eco7pin
This was a very productive discussion, and I bet Dongar sales will increase.
dash cam for the J12 and rear view mirror USB compatibility
-
- Posts: 23
- Joined: Wed Sep 30, 2015 1:43 pm
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
That's good news, thanks for reporting that back here
2022/22 J12 ceramic grey DIG-T 158 MHEV Tekna
2018/68 J11b gun metal 1.6 DIG-T Tekna
2015/65 J11 magnetic red 1.6 DIG-T n-tec+
2010/10 J10b silver 1.6 n-tec
2018/68 J11b gun metal 1.6 DIG-T Tekna
2015/65 J11 magnetic red 1.6 DIG-T n-tec+
2010/10 J10b silver 1.6 n-tec
-
- Posts: 23
- Joined: Wed Sep 30, 2015 1:43 pm
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
Just installed the adapter as it arrived this week. All works fine, live on ignition. Just noticed on the photos I may have to move the cable as it’s close to the sensor on the back of the mirror, may get a longer cable as the ones supplied are quite short.
2022/22 J12 ceramic grey DIG-T 158 MHEV Tekna
2018/68 J11b gun metal 1.6 DIG-T Tekna
2015/65 J11 magnetic red 1.6 DIG-T n-tec+
2010/10 J10b silver 1.6 n-tec
2018/68 J11b gun metal 1.6 DIG-T Tekna
2015/65 J11 magnetic red 1.6 DIG-T n-tec+
2010/10 J10b silver 1.6 n-tec
-
- Posts: 23
- Joined: Wed Sep 30, 2015 1:43 pm
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
With the adapter, you get a micro usb and a mini usb (I think), both about 15-20cm long
2022/22 J12 ceramic grey DIG-T 158 MHEV Tekna
2018/68 J11b gun metal 1.6 DIG-T Tekna
2015/65 J11 magnetic red 1.6 DIG-T n-tec+
2010/10 J10b silver 1.6 n-tec
2018/68 J11b gun metal 1.6 DIG-T Tekna
2015/65 J11 magnetic red 1.6 DIG-T n-tec+
2010/10 J10b silver 1.6 n-tec
Great idea but that looks very untidy.
Rather go through the long process of hardwiring the old way and tuck/tidy up the cables nice and neatly.
Rather go through the long process of hardwiring the old way and tuck/tidy up the cables nice and neatly.
Last edited by ST09 on Mon May 23, 2022 1:16 am, edited 1 time in total.
-
- Posts: 18
- Joined: Tue Jun 30, 2015 1:24 pm
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
I guess its a matter of preference. The advantage of the hardwired installation would be constant power, which would allow continuous recording (AKA parking guard mode).
Any guides on doing that on the j12 qashqai, without risking damage to the trim?
-
- Posts: 18
- Joined: Tue Jun 30, 2015 1:24 pm
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
Finally my adapter arrived, so I installed it today, as tidy as I could. Pretty discreet I think. You can barely see it from the driver or passenger seat. Both the mirror and dashcam work like a charm. And the sensor at the back of the mirror is not blocked at all.
-
- Posts: 8
- Joined: Sun Nov 26, 2023 4:20 pm
- Qashqai Model: Mk.3 Qashqai - J12 (2021+) New Model
Hi just been looking back over your forum posts and see you may have an answer to my question, I’ll attach my post below so you can see my issue
Hi I’m hoping someone has experience of fitting the B84526UROA integrated Qashqai Dash Cam. I have a 2023 E-Power Tekna and notice there are spare socket outlets in the back of the rear view mirror. I am wondering if it’s possible to wire in this Dash Cam there as it’s so close to the windscreen mounted Cam and would save removing the head lining and door pillar covers. I’ve sent an email to Glyn Hopkin and my local Nissan Garage (who supplied my new car in June) but neither have replied. Many thanks in advance for any suggestion or help
Hoping you may have the answer
Many thanks Dave
Hi I’m hoping someone has experience of fitting the B84526UROA integrated Qashqai Dash Cam. I have a 2023 E-Power Tekna and notice there are spare socket outlets in the back of the rear view mirror. I am wondering if it’s possible to wire in this Dash Cam there as it’s so close to the windscreen mounted Cam and would save removing the head lining and door pillar covers. I’ve sent an email to Glyn Hopkin and my local Nissan Garage (who supplied my new car in June) but neither have replied. Many thanks in advance for any suggestion or help
Hoping you may have the answer
Many thanks Dave