Oil Cooler 2010 diesel

[eugene66]

Good morning all

has anyone got access to a schematic diagram of a nissan qashqai 2010 diesel oil cooler as i need to see if there is a seal missing on the centre bolt holding to the engine block

whoever took apart before made a real hash job putting it back together what ALOT of silicone seal !!!!!!!!
Thankyou all
Eugene

[Brommas]

I will go through the workshop manual I have a little later when I get a chance and see if there is anything in there, the bolts are supposed to be tightened in a diagonal sequence to a 1st stage torque then finally to a second stage torque, that's probably why there is silicone everywhere if someone just lumped it back together deciding rtv would stop it leaking(so to speak), I will try and get some time later to take a look for you, I don't think there is any type of seal though apart from the gasket for the cooler and the o ring for the tube(which should be replaced).

Torque spec:-



Stage 1 5 4
Stage 2 25 18(nm is left hand lb ft is right)

I've had a look through my workshop manual and can't find anything extra other than what I've already posted here, sorry.