Clutch clicking
-
lordbanana
- Posts: 8
- Joined: Tue Feb 07, 2023 12:56 pm
- Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)
Follow the clutch arm until you see a small black plug attached to the right side. Push it and it should click into place. That's what did it for me! J10 2010
-
lordbanana
- Posts: 8
- Joined: Tue Feb 07, 2023 12:56 pm
- Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)
-
Valleyboy22
- Posts: 48
- Joined: Sat Aug 10, 2019 3:53 pm
- Qashqai Model: Mk.1 Qashqai Facelift - J10b (2010–2013)
Thanks I will have a look as it's now been going on for over a year.
-
lordbanana
- Posts: 8
- Joined: Tue Feb 07, 2023 12:56 pm
- Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)
Mine keeps popping out again. Turns out it's part of the master cylinder rod. Quite a common problem. Going to try using a cable tie.
https://www.noteownersclub.co.uk/thread ... ssed.4346/
https://www.noteownersclub.co.uk/thread ... ssed.4346/
-
Miketango56
- Posts: 1
- Joined: Fri Dec 08, 2023 8:20 pm
- Qashqai Model: Mk.1 Qashqai - J10 (2006–2013)
The clicking is from the pedel , the push rod is made of plastic and the push on end is a plastic push on cage [like what goes on boot strut top and bottom ] mine wore and started jumping off , clicking first , when this happens garages would replace whole pushrod to slave cylinder.
Ive found easy fix , get the screw on ball bit of old boot strut , saw screw end of leaving just ball socket , snip plastic cage of end of slipping cage push on , leaving the flat platic end on , put thin metal washer on them push the locking boot stut end on , job done , better than paying £80 for new plus garage charges
Ive found easy fix , get the screw on ball bit of old boot strut , saw screw end of leaving just ball socket , snip plastic cage of end of slipping cage push on , leaving the flat platic end on , put thin metal washer on them push the locking boot stut end on , job done , better than paying £80 for new plus garage charges
